02-26-2014 04:10 AM - edited 03-16-2019 09:55 PM
Dear Sir,
I've gave authorization to handle the IP Telephony in our company.
But I've noticed that user can access easily to call National & International.
Is there any configuration that you can put a password or Security on all of my Cisco Telephones before they dial?
Model (7945 & 9951)
Exp: For 7945
ephone-dn 1 dual-line
number 202
pickup-call any-group
pickup-group 12
label Rodny
name Rodny
corlist incoming EMPInt
!
!
ephone-dn 2 dual-line
number 203
pickup-call any-group
pickup-group 11
label Don Don
name Don Don
corlist incoming EMPInt
!
!
ephone-dn 3 dual-line
number 204
label Saeed Dammam
name Saeed Dammam
corlist incoming EMPInt
!
!
ephone-dn 4 dual-line
number 226
label pki2
name pki2
corlist incoming EMPNat
!
For 9951:
voice register dn 17
number 200
pickup-call any-group
pickup-group 11
name Derjem
shared-line max-calls 4
label Derjem
mwi
!
voice register dn 18
number 201
pickup-call any-group
pickup-group 12
name Arife
shared-line max-calls 4
label Arife
mwi
Thanks,
Michael
02-26-2014 05:38 AM
Adjust cor lists appropriately or implement FACs.
Chris
Sent from Cisco Technical Support iPhone App
02-26-2014 05:45 AM
Chris,
Is possible to configure secruity password for phones registerd to cucm.
02-26-2014 09:30 PM
Hi Cris,
How to configure that? because the user want to have an access for International call.
and he want to have a security for other users.
Thanks,
02-26-2014 05:49 AM
Yes, FACs are available on CME and CUCM, your config was drone CME.
Chris
Sent from Cisco Technical Support iPhone App
02-27-2014 06:54 AM
Is this for CUCM or CME as your config was for CME yet you mentioned CUCM?
Chris
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide