Setup for 8861 3PCC - need help

[Espenlie]

Hi, 

I just received my new 8861 3PCC IP phone and I'm using a 3rd party supplier. 
I have searched everywhere how to put in the SIP information to the phone but can't find it. 

Can anyone help me regarding this? 

[Leo Laohoo]

Read this:  3PCC Setup

[Espenlie]

Thank you!
What is the password for the web interface then?

[Espenlie]

I have no idea where to put in the information. 

I have the SIP address to my supplier, i have user ID and Password. 

But this was to "big" for me, even if I'm a computer nerd... 
Completely new to IP setup I'm afraid.  

[Leo Laohoo]

Go to the SIP tab and enter the SIP details.

[Espenlie]

I'm in the SIP tab, but can't find where to put in my information.

[Espenlie]

Hi again, 

I have still not got my phone to work. 

I have the following information by hand: 

SIP address: sip.phonero.net

Username: xxxxxxxxxxxxx

Password: xxxxxxxxxxxxx

The question is, where in the administration page do i put in these informations? 

[ADAM CRISP]

Try this

Log in to the phone web interface

click admin

click advanced

click voice tab

click ext1

Line enable = yes

scroll down to "Proxy and Registration"

Proxy = sip.phonero.net

Outbound Proxy = sip.phonero.net

Use OB Proxy In Dialog = yes

Register = Yes

Register Expires:  = 120

DNS-SRV Auto prefix = yes

Use DNS-SRV = yes

Subscriber Information

Display name = <put your sip username here>

User ID  = <put your sip username here>

Auth ID = <put your sip username here>

Password <put your sip password here>

Click submit all changes

If this still fails

1. Ask your service provider

2. Read the manual

3. Configuration is not dis-similar to the old Linksys SPA

You might need to tweak your dial-plan for your region - again internet search for help.

Here's mine in the UK:

(*xx|999S0|[3469]11|0|00|0[1-3]xxxxxxxxxS0|07xxxxxxxxxS0|[2-9]xxxxxx|1xxx[2-9]xxxxxxS0|xxxxxxxxxxxx.|+xxxxxxxxxxxx.)

[Espenlie]

Hi, 

Thanks for the detailed answer. 

I put in the data that you told me, but still no connection. 
I have checked with my supplier but nothing seems to be working I'm afraid. 
I get this status on Ext 1 after restart.