cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
329
Views
5
Helpful
1
Replies

sh dial-peer voic sum

fpaqual
Level 1
Level 1

hi please, tag 200 is in busyout, which CLI command to reset the TAG 200? 

 

GNEGNEO#sh dial- voice sum
dial-peer hunt 0
AD PRE PASS SESS-SER-GRP\ OUT
TAG TYPE MIN OPER PREFIX DEST-PATTERN FER THRU SESS-TARGET STAT PORT KEEPALIVE VRF
100 voip up up 0 syst NA
101 voip up up 0 syst NA
200 voip up up 715307....$ 0 syst ipv4:10.89.166.163 busyout NA
201 voip up up 715307....$ 1 syst ipv4:10.89.166.164 active NA
300 voip up up 1 syst NA
400 voip up up .T 0 syst ipv4:172.31.15.151:5 active NA
399 voip up up 1 syst NA
For server-grp details please execute command:show voice class server-group <tag_id>
To see complete session target for ipv6 use 'sh running-config | section dial-peer <tag>
GNEGNEO#

1 Reply 1

It is in the Busyout state because the router has not gotten a response to SIP option ping from the destination on that dial peer. There are no command to reset this, you’ll need to fix the problem with communication and the dial peer will be in Active state.



Response Signature