01-23-2012 07:52 AM - edited 03-16-2019 09:09 AM
Hi Team
I have a SIP trunk between my CCM ver 6 with my Voice Gateway .
I can make a call normaly , but I am not able to transfer to another CCM IP Phone
Please any sugestion ?
Solved! Go to Solution.
01-24-2012 10:27 AM
01-24-2012 10:33 AM
You said you have CUCM not CME, so this is not relevant here.
You also said you are using SIP for the call control, looking at your config you are using H323 between this GW and CallManager:
dial-peer voice 300 voip
destination-pattern .
voice-class codec 2
session target ipv4:172.19.0.253
you may want to add the following to the dial-peer:
dial-peer voice 300 voip
voice-class codec 1
no vad
The debug appears to be incomplete, did you post it for the entire call?
Chris
01-24-2012 11:14 AM
Just to add
no vad and change the Codec to 1 ?
I did but no changes
Yes the debug is for entire call - Its look like the call stop after tranfer
Regards
02-26-2012 10:31 AM
HI Team
Any help ? - Still withc the problem
Regards
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide