cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
666
Views
0
Helpful
3
Replies

SIP CP7942 unprovisional. Not register to CME.

Sergey Kostenko
Level 1
Level 1

Hello.

I try to register CP7942 (SIP42.9-1-1SR1S) to CME but no result. Say me how correct do it. Follow some information about soft & hard.

 

IOS: Cisco IOS Software, 2800 Software (C2800NM-ADVIPSERVICESK9-M), Version 15.1(4)M12a, RELEASE SOFTWARE (fc1)

Hardware: Cisco 2811 (revision 1.0) with 708608K/77824K bytes of memory.

#sh voice register global
CONFIG [Version=8.6]
========================
  Version 8.6
  Mode is cme
  Max-pool is 24
  Max-dn is 144
  Outbound-proxy is enabled and will use global configured value
  Security Policy: DEVICE-DEFAULT
  Forced Authorization Code Refer is enabled
  Source-address is 10.1.100.100 port 5060
  Load 7911 is SIP11.9-3-1SR2-1S
  Load 7960-40 is P0S3-8-12-00
  Load 7942 is SIP42.9-1-1SR1S.loads
  Authenticate register
  Authenticate realm cme.local
  NTP Server Address is 10.1.101.1
  NTP Server Mode is: unicast
  Time-format is 24
  Date-format is D/M/Y
  Time-zone is 32
  Hold-alert is disabled
  Mwi stutter is disabled
  Mwi registration for full E.164 is disabled
  Forwarding local is enabled
  Video is disabled
  Camera is disabled
  Privacy is enabled
  Privacy-on-hold is disabled
  Dst auto adjust is enabled
    start at Apr week 1 day Sun time 02:00
    stop  at Oct week 8 day Sun time 02:00
  Max redirect number is 5
  IP QoS DSCP:
    ef (the MS 6 bits, 46, in ToS, 0xB8) for media
    cs3 (the MS 6 bits, 24, in ToS, 0x60) for signal
    af41 (the MS 6 bits, 34, in ToS, 0x88) for video
    default (the MS 6 bits, 0, in ToS, 0x0) for service
  Telnet Level: 0
  Tftp path is flash:
  Generate text file is enabled
  Tftp files are created, current syncinfo 0042639835325711
  OS79XX.TXT is not created
  timeout interdigit 10
  network-locale[0] RU    (This is the default network locale for this box)
  network-locale[1] US
  network-locale[2] US
  network-locale[3] US
  network-locale[4] US
  user-locale[0] RU    (This is the default user locale for this box)
  user-locale[1] US
  user-locale[2] US
  user-locale[3] US
  user-locale[4] US   Active registrations  : 0

  Total SIP phones registered: 0
  Total Registration Statistics
    Registration requests  : 22
    Registration success   : 2
    Registration failed    : 20
    unRegister requests    : 2
    unRegister success     : 2
    unRegister failed      : 0
    Attempts to register
           after last unregister : 3
    Last register request time   : 23:42:06.711 MSK Thu Jul 12 2018
    Last unregister request time : 13:20:17.966 MSK Thu Jul 5 2018
    Register success time        : 12:20:17.945 MSK Thu Jul 5 2018
    Unregister success time      : 13:20:17.967 MSK Thu Jul 5 2018

3 Replies 3

Share your configuration to check if you are missing something. Along with
it share debug ccsip messages.

Hello. It`s part may config:

--------------------------------------------------

!
version 15.1
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
service sequence-numbers
!
hostname C2811
!
boot-start-marker
boot system flash:/c2800nm-advipservicesk9-mz.151-4.M12a.bin
boot-end-marker
!
!
logging buffered 8192
!
aaa new-model
!
!
aaa authentication login default local
!
!
!
!
!
aaa session-id common
!
memory-size iomem 10
clock timezone MSK 3 0
!
no dot11 syslog
!
!
!
ip cef
ip dhcp excluded-address 10.1.101.1 10.1.101.30
ip dhcp excluded-address 10.1.101.100 10.1.101.254
ip dhcp ping packets 3
ip dhcp ping timeout 100
!
ip dhcp pool VLAN10
 network 10.1.101.0 255.255.255.0
 default-router 10.1.101.1
 dns-server 10.1.101.1
 option 150 hex 0a01.6501
 option 7 ip 10.1.101.22
 option 42 ip 10.1.101.1
 lease 0 3
!
!
ip dhcp pool 01d4.d748.4101.8b
 host 10.1.101.80 255.255.255.0
 client-identifier 01d4.d748.4101.8b
 option 66 ip 10.1.101.1
!
!
!
ip domain timeout 2
ip multicast-routing
ipv6 unicast-routing
ipv6 cef
!
multilink bundle-name authenticated
!
frame-relay switching
!
stcapp ccm-group 1
stcapp
!
stcapp feature access-code
 prefix ##
!
!
!
stcapp supplementary-services
 port 0/0/0
  fallback-dn 9711
 port 0/0/1
  fallback-dn 9712
!
stcapp call-control mode feature
!
vpdn enable
!
vpdn-group Home
 ! Default PPTP VPDN group
 accept-dialin
  protocol pptp
  virtual-template 1
 l2tp tunnel timeout no-session 15
!
!
!
voice dsp release early
!
voice service pots
 supported-language ru
!
voice service voip
 ip address trusted list
  ipv4 212.53.40.0 255.255.255.0
 address-hiding
 media flow-around
 allow-connections h323 to h323
 allow-connections h323 to sip
 allow-connections sip to h323
 allow-connections sip to sip
 supplementary-service h450.12
 no supplementary-service h225-notify cid-update
 no supplementary-service sip moved-temporarily
 no supplementary-service sip refer
 redirect ip2ip
 h323
  emptycapability
  billing b-channel
  h225 signal overlap
  h225 id-passthru
  call start slow
  h245 passthru all
 sip
  session transport tcp
  registrar server
  transport switch udp tcp
  early-offer forced
!
voice class codec 2
 codec preference 1 g711ulaw
 codec preference 2 g711alaw
!
voice class codec 1
 codec preference 3 g729r8
 codec preference 4 g729br8
 codec preference 5 g711ulaw
 codec preference 6 g711alaw
!
voice class h323 1
  call preserve
  h245 caps mode unrestricted
  telephony-service ccm-compatible
  ccm-compatible
!
voice class custom-cptone class1
 dualtone busy
  frequency 425
  cadence 505 480
 dualtone disconnect
  frequency 400
  cadence 500 500
!
voice class custom-cptone LEAVE
 dualtone conference
  frequency 450 750
  cadence 300 150 300 100 300 50
!
voice class custom-cptone JOIN
 dualtone conference
  frequency 600 900
  cadence 300 150 300 100 300 50
!
voice class custom-cptone jointone
 dualtone conference
  frequency 1212 1212
  cadence 150 50 150 50
!
voice class custom-cptone leavetone
 dualtone conference
  frequency 909 909
  cadence 150 50 150 50
!
!
voice register global
 mode cme
 source-address 10.1.101.1 port 5060
 max-dn 144
 max-pool 24
 load 7960-7940 P0S3-8-12-00
 load 7942 SIP42.8-5-4S
 load 7911 SIP11.9-3-1SR2-1S
 authenticate register
 authenticate realm cme.local
 timezone 32
 time-format 24
 date-format D/M/Y
 tftp-path flash:
 file text
 create profile sync 0042639835325715
 network-locale RU
 user-locale RU
 ntp-server 10.1.101.1 mode unicast
!
voice register dn  1
 number 9741
 name 9741
 no-reg
 label line1@9741
!
voice register dn  2
 number 9742
 name 9742
 no-reg
 label line2@9742
!
voice register template  1
!
voice register pool  1
 id mac D4D7.4841.018B
 number 1 dn 1
 voice-class codec 2
 username 9741 password 9741
!
voice register pool  2
 id mac 0000.0000.9742
 number 1 dn 2
 voice-class codec 2
 username 9742 password 9742
!
voice hunt-group 1 parallel
 list 9711,9701,9704
 pilot 97001
 preference 7 secondary 9
--------------------------------------------------

Debug ccsip message show that CP7942 not try to register on C2811 :-(.

Debug tftp event show that CP7942 request files every minute

--------------------------------------------------

Jul 15 22:43:49 10.1.101.1 015572: Jul 15 19:43:48.693: TFTP: Looking for CTLSEPD4D74841018B.tlv
Jul 15 22:43:49 10.1.101.1 015573: Jul 15 19:43:48.813: TFTP: Looking for SEPD4D74841018B.cnf.xml

--------------------------------------------------

 

Hi @Sergey Kostenko

 

Please add the command

Type 《phone's type》 under your voice register pool

Re create profile under voice regrister global

And restart your ip phones.

 

 

 

Best regards
.ı|ı.ı|ı. If This Helps, Please Rate .ı|ı.ı|ı.