Has anyone had any success getting ANVEO to work with a 2851 CME router? Here is the info Anveo provided for me to use:
Username: |
| 5551112222 |
Password |
| abc123 |
SIP Registration Servers/Proxy: |
| sip.anveo.com:5010 (USA) sip.ca.anveo.com:5010 (CANADA) sip.de.anveo.com:5010 (GERMANY) |
Supported codecs: |
| All Subscription Plans:G.711 ulaw (PCMu), GSM Premium Plans (Starter and up): G.722, G.729 |
Protocol: |
| UDP, TCP (only available on premium subscription plans: Starter and up) |
Additional information which might be helpful |
Realm: |
| anveo.com |
Port: |
| 5010 |
And Here are the setttings I have in the router thus far:
!
voice service voip
allow-connections sip to sip
redirect ip2ip
sip
registrar server
!
sip-ua
authentication username 5551112222 password 7
nat symmetric check-media-src
no remote-party-id
registrar ipv4:72.9.149.69:5010 expires 3600
sip-server ipv4:72.9.149.69:5010
!
I got the IP address by pinging sip.anvero.com.
Any suggestions?