I am setting up a small ISP for my neighbors.  I have a three Cisco switches running IOS ipservices 15.0, one 3750G, one 3750v2, and one 2960LT-L running LanBase 15.0. My main switch is a 3750G and on port gi1/0/40, a Cisco 4331 router that AT&T provided.  This router provides us with 8 public IP addresses and uses one of them.  Currently I have this router in Vlan 12. On port gi1/0/41, I have my business' C3925 router and it needs to get one of the public IP addresses.  This port is also in Vlan 12. Port gi1/0/42 is neighbor 1 and they need a public IP address Port gi1/0/43 is neighbor 2 and they need a public IP address Switch two, a 3750v2 has a trunk to switch 1 which includes Vlan 12. The trunk port is port fa2/0/1.  Neighbor 3 is connect to port fa2/0/2 on this switch and is in Vlan 12.  Port fa2/0/48 is a trunk port to switch 3 Switch 3 is the 2960LT-L.  Port fa0/1 is a trunk port to switch 2.  Port fa0/2 is in vlan 12 and connects to a wifi access point where neighbors 4 and 5 connect to.  This access point does support Vlans. ALL five neighbors need a public IP address in the 12. network but what is the best way to keep one neighbor from seeing other's routers.  Keep in mind that the neighbors will be using retail routers that have  a WAN port which will connect to my switch and their internal networks will be on a private IP. Would private-vlans help with security and how would I configure them given that the neighbors and the internet router are on the same network? ... View more

I am getting a 50Mbs fiber internet connection in a few weeks and I will be sharing it with my neighbors.  The only option here is AT&T dedicated service which is very expensive. So we share it. I am using a Cisco 3750v2 switch with IOS 15.0 and I have all the wiring to their houses done and working.  Each house will get a dedicated static public IP address. What I would like to do is set each port to provide a minimum of 5Mbs per port (house) but if the full 50Mbs is available, they should be allowed to use the full 50Mbs. The switch has a maximum bandwidth option but how do I set a minimum and allow the more if available? ... View more

I am trying to install the software on my ISM and it requires FTP to do so.  But when I enter the command: service-module ism 0/0 install url ftp://mdurham:Cisco$1@192.168.69.61/cue-vm-k9.SPA.sme.8.6.12.pkg script cue-vm-k9.SPA.sme.8.6.12.pkg.install.sre I get the following error: %Error: Couldn't open ftp://*:*@192.168.69.61/FTP%20Files/ISM-CUE/cue-vm-k9.SPA.sme.8.6.12.pkg.install.sre I have tried to test with the copy ftp... flash command and it gets the same error.  I then opened a command prompt in Windows and ran the FTP command.  I could open a connection and get a the file that way using the same credentials.  Any suggestions?  My FTP server is CrushFTP. ... View more

I need to set a user to Privileged level 5 and still have them to be able to access two custom html pages that are on a 2811 router.  User with privilege level 15 and ONLY 15 can access these pages.  Users will be defined locally only. These custom web pages only load locally stored pdf files and will not control the router.   Any suggestions? ... View more

A design question... We have one main building and four close remote buildings at our location.  At the main building will be getting AT&T business fiber optic 50Mbps connection with 24 static IP addresses. One of the remote buildings is close enough that we can run an Ethernet cable to it.  However, the three other remote buildings are too far for Ethernet but well within WiFi range. Here is the problem, we need each remote building to have a public IP address that will be provided by AT&T delivered to the remote building's router.  Most likely the remote building's router will be a LinkSys or other store bought router.   AT&T provided Cisco 1941 router --> Our Cisco 3750v2 switch ---> 3750v2 Switch --> user equipment                                                                                                   ---> WiFi bridge/router --> WiFi bridge/router -->LinkSys -->user equipment.                                                                                                   ---> WiFi bridge/router --> WiFi bridge/router -->LinkSys -->user equipment.                                                                                                   ---> WiFi bridge/router --> WiFi bridge/router -->LinkSys -->user equipment.   We are planning on using two WiFi bridge/routers for each location and a mix of 2.4Ghz and 5Ghz so they do not step on each other too bad.  All WiFi bridge/routers will be located outdoors. Remember, the LinkSys MUST have a public IP address on its WAN side. What equipment, Cisco or non Cisco, do you suggest to meet our needs?  We do not need more than 50Mbps transmission speed as ONLY internet access will be on the WAN WiFi network. Also, we prefer to stay with older equipment to save on costs. ... View more

My 3945 router has a GRE tunnel configured on it to communicate to other routers over the internet.  It is a DMVPN and works correctly.  Now I need to add the ability for me to connect to my router from a Windows machine using DUNS.  I have found a configuration to PPP but before I apply it, I need to be sure that it will work and not break my current tunnel. We want to use local authentication for the DUNS/PPP connection and the only thing we will be running is remote desktop.  No file/drive sharing.  Our internet source is via the cellular0/3/0 interface ONLY. Please take a look at our current config and the config that I want to add and let me know if I need to change anything, add anything, move any code to a different place, or do it a completely different way to meet my goals etc. NEW CODE vpdn-group 1 Default PPTP VPDN group accept-dialin protocol pptp virtual-template 1 pptp tunnel echo 10 l2tp tunnel timeout no-session 15 ip pmtu ip mtu adjust interface cellular0/3/0 pppoe enable group global pppoe-client dial-pool-number 1 no cdp enable interface Virtual-Template1 ip unnumbered Loopback0 ip mtu 1492 ip virtual-reassembly autodetect encapsulation ppp peer default ip address pool PPP ppp encrypt mppe auto required ppp authentication ms-chap-v2 nterface Dialer1 ip address negotiated ip nat outside ip virtual-reassembly encapsulation ppp dialer pool 1 dialer-group 1 ppp authentication pap callin ppp pap sent-username DSLUSERNAME password DSLPASSWORD ip local pool PPP 192.168.207.200 192.168.207.250 CURRENT CONFIG: Current configuration : 38460 bytes ! ! Last configuration change at 22:31:43 DST Tue Jun 18 2019 by mdurham4 version 15.2 service timestamps debug datetime msec localtime service timestamps log datetime msec localtime year service password-encryption service internal service sequence-numbers ! hostname TDC_CME_Router ! boot-start-marker boot-end-marker ! enable secret Cisco ! no aaa new-model clock timezone EST -5 0 clock summer-time DST recurring ! ! crypto pki trustpoint TP-self-signed-33159 enrollment selfsigned subject-name cn=IOS-Self-Signed-Certificate-33159 revocation-check none rsakeypair TP-self-signed-33159 ! ! crypto pki certificate chain TP-self-signed-33159 certificate self-signed 01 3082024C 308201B5 A0030201 02020101 300D0609 2A864886 F70D0101 04050030 ADF1073D 3222259C 290A63BF 6B93FC99 E9AB32D1 C4980427 9CDB03BA 8C964379 B557EAC1 EB6DD51A 8B7F4967 908C54B6 ADC72EB8 D5678318 76FA7141 693AF1C1 7819D0E7 7C444619 4A1A5AB9 D28315F6 quit ! ip dhcp smart-relay ip dhcp relay information option ip dhcp excluded-address 10.110.0.1 10.110.0.20 ip dhcp excluded-address 192.168.0.1 192.168.0.155 ip dhcp excluded-address 192.168.0.200 192.168.0.254 ip dhcp excluded-address 192.168.50.1 192.168.50.200 ip dhcp excluded-address 192.168.69.1 192.168.69.240 ip dhcp excluded-address 192.168.70.1 192.168.70.20 ip dhcp excluded-address 192.168.200.1 192.168.200.240 ! ip dhcp pool Voice network 10.110.0.0 255.255.255.0 default-router 10.110.0.1 option 150 ip 10.110.0.1 dns-server 1.1.1.1 lease 0 12 ! ip dhcp pool Users network 192.168.69.0 255.255.255.0 default-router 192.168.69.1 dns-server 1.1.1.1 option 150 ip 10.110.0.1 lease 0 12 ! ip dhcp pool TempVMware network 192.168.70.0 255.255.255.0 default-router 192.168.70.1 dns-server 192.168.50.100 lease 0 12 ! ip dhcp pool Wiireless network 192.168.200.0 255.255.255.0 default-router 192.168.200.1 dns-server 1.1.1.1 option 150 ip 10.110.0.1 lease 0 12 ! ip dhcp pool VMware network 192.168.50.0 255.255.255.0 default-router 192.168.50.1 dns-server 192.168.50.5 lease 0 12 ! ip name-server 1.1.1.1 ip name-server 8.8.8.8 ip name-server 4.2.2.2 ip inspect WAAS flush-timeout 10 ip cef no ipv6 cef ! multilink bundle-name authenticated ! ! chat-script ltescript "" "AT!CALL1" TIMEOUT 20 "OK" password encryption aes voice-card 0 dsp services dspfarm ! voice service voip ip address trusted list ipv4 72.999.999.999 allow-connections sip to sip no supplementary-service sip moved-temporarily no supplementary-service sip refer redirect ip2ip fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback none sip registrar server ! voice class codec 1 codec preference 1 g711ulaw ! voice class custom-cptone joining-tone dualtone conference frequency 1000 1000 cadence 150 50 150 50 ! voice class custom-cptone leaving-tone dualtone conference frequency 900 900 cadence 150 50 150 50 ! ! voice register global max-dn 100 max-pool 100 ! voice register pool 50 no digit collect kpml ! voice translation-rule 2 rule 1 /\([2-9].........\)/ /1\1/ ! voice translation-rule 3 rule 1 /411/ /18003733411/ ! voice translation-rule 4 rule 1 reject /0/ ! ! voice translation-profile BLOCK-INBOUND translate calling 4 ! voice translation-profile Eleven_Digit_Dialing translate calling 10 ! voice translation-profile Free_411 translate called 3 ! voice translation-profile Incoming_calls translate called 1 ! voice translation-profile Ten_Digit_Dialing translate calling 10 translate called 2 ! license udi pid C3900-SPE100/K9 sn FOCC license accept end user agreement license boot module c3900 technology-package securityk9 license boot module c3900 technology-package uck9 hw-module pvdm 0/0 ! hw-module sm 1 ! hw-module sm 2 ! dial-control-mib retain-timer 10080 dial-control-mib max-size 500 username mdurham privilege 15 password cisco1 username ssommer privilege 15 password cisco2 username ldisbrow privilege 15 password cisco3 ! redundancy notification-timer 60000 ! controller Cellular 0/3 ! track 10 ip sla 1 reachability delay down 1 up 1 ! track 20 ip sla 2 reachability delay down 1 up 1 ! crypto isakmp policy 100 encr aes 256 hash sha512 authentication pre-share group 16 lifetime 3600 crypto isakmp key 6 CarKey address 0.0.0.0 crypto isakmp keepalive 10 periodic ! ! crypto ipsec transform-set support ah-sha512-hmac esp-3des ! crypto ipsec profile support set security-association lifetime seconds 86400 set transform-set support ! interface Tunnel1 description mGRE - DMVPN Tunnel for customer remote support ip address 172.16.0.1 255.255.0.0 no ip redirects ip nhrp authentication CarKey ip nhrp map multicast dynamic ip nhrp network-id 455 tunnel source 166.999.999.999 tunnel mode gre multipoint tunnel protection ipsec profile support ! interface Embedded-Service-Engine0/0 no ip address ! interface GigabitEthernet0/0 no ip address no ip route-cache cef duplex auto speed auto ! interface GigabitEthernet0/0.2 description Sommer's Network encapsulation dot1Q 2 ip address 192.168.0.253 255.255.255.0 ip nat inside ip virtual-reassembly in ip tcp adjust-mss 1300 ip policy route-map clear-df ! interface GigabitEthernet0/0.50 description "VMWare Server HP DL160 Server 3" encapsulation dot1Q 50 ip address 192.168.50.1 255.255.255.0 ip nat inside ip virtual-reassembly in ip tcp adjust-mss 1300 ip policy route-map clear-df ! interface GigabitEthernet0/0.69 description "Data Network" encapsulation dot1Q 69 native ip address 192.168.69.1 255.255.255.0 ip nat inside ip virtual-reassembly in ip tcp adjust-mss 1300 ip policy route-map clear-df ! interface GigabitEthernet0/0.110 description "Voice Network" encapsulation dot1Q 110 ip address 10.110.0.1 255.255.255.0 ip nat inside ip virtual-reassembly in ip tcp adjust-mss 1300 ip policy route-map clear-df ! interface GigabitEthernet0/0.200 description "Wireless - Guest User Network" encapsulation dot1Q 200 ip address 192.168.200.1 255.255.255.0 ip access-group 100 in ip nat inside ip virtual-reassembly in ip tcp adjust-mss 1300 ip policy route-map clear-df ! interface GigabitEthernet0/1 description "VMWare Server Dell R620 Server 1" ip address 192.168.51.1 255.255.255.0 ip nat inside ip virtual-reassembly in no ip route-cache ip tcp adjust-mss 1300 ip policy route-map clear-df shutdown duplex auto speed auto ! interface GigabitEthernet0/2 no ip address no ip route-cache shutdown duplex auto speed auto ! interface FastEthernet0/0/0 ip address dhcp ip nat outside ip nat enable ip virtual-reassembly in shutdown duplex auto speed auto ! interface Integrated-Service-Engine1/0 no ip address shutdown no keepalive ! interface SM2/0 description Unity-Express-Service ip unnumbered GigabitEthernet0/0.110 ip nat inside ip virtual-reassembly in service-module fail-open service-module ip address 10.110.0.2 255.255.255.0 service-module ip default-gateway 10.110.0.1 ! interface SM2/1 description Internal switch interface connected to Service Module no ip address ! interface Cellular0/3/0 ip address negotiated ip access-group Protect in no ip unreachables ip nat outside ip virtual-reassembly in encapsulation slip load-interval 30 dialer in-band dialer idle-timeout 0 dialer string ltescript dialer watch-group 1 async mode interactive pulse-time 0 ! interface Vlan1 no ip address ! interface Dialer0 ip address negotiated ip mtu 1452 ip nat outside ip virtual-reassembly in encapsulation ppp dialer pool 1 dialer idle-timeout 0 dialer string 123456 dialer persistent dialer-group 1 no cdp enable ! ! router eigrp 1577 network 10.110.0.0 0.0.0.255 network 192.168.0.0 network 192.168.50.0 network 192.168.69.0 network 192.168.200.0 ! no ip forward-protocol nd ! ip http server ip http authentication local ip http secure-server ip http timeout-policy idle 60 life 86400 requests 10000 ip http path flash:CME_GUI ! no ip nat service sip udp port 5060 ip nat inside source list 151 interface Cellular0/3/0 overload ip route 0.0.0.0 0.0.0.0 Cellular0/3/0 track 10 ip route 0.0.0.0 0.0.0.0 192.168.0.254 10 track 20 ip route 4.2.2.2 255.255.255.255 Cellular0/3/0 ip route 10.110.0.2 255.255.255.255 SM2/0 ! ip access-list extended Protect remark Protect connections from the Internet deny tcp any any eq telnet deny tcp any any eq www permit ip any any ! ip sla auto discovery ip sla 1 icmp-echo 4.2.2.2 source-interface Cellular0/3/0 threshold 750 timeout 900 frequency 1 ip sla schedule 1 life forever start-time now ip sla 2 icmp-echo 192.168.0.254 source-ip 192.168.0.253 threshold 750 timeout 900 frequency 1 ip sla schedule 2 life forever start-time now logging history size 500 access-list 20 remark Networks Allowed onto the Internet access-list 20 permit 10.110.0.0 0.0.0.255 access-list 20 permit 192.168.0.0 0.0.0.255 access-list 20 permit 192.168.50.0 0.0.0.255 access-list 20 permit 192.168.51.0 0.0.0.255 access-list 20 permit 192.168.69.0 0.0.0.255 access-list 20 permit 192.168.200.0 0.0.0.255 access-list 20 permit 172.16.0.0 0.0.255.255 access-list 100 remark "Block Guest network to everything except the printers, ntp & the Internet access-list 100 permit udp host 162.210.111.4 eq ntp host 192.168.200.1 eq ntp access-list 100 permit ip any host 192.168.69.90 access-list 100 permit ip any host 192.168.69.91 access-list 100 permit ip any host 192.168.69.92 access-list 100 permit ip any 192.168.200.0 0.0.0.15 access-list 100 deny ip any 192.168.0.0 0.0.255.255 access-list 100 permit ip any any access-list 151 permit ip 10.0.0.0 0.255.255.255 any access-list 151 permit ip 172.16.0.0 0.15.255.255 any access-list 151 permit ip 192.168.0.0 0.0.255.255 any dialer watch-list 1 ip 5.6.7.8 0.0.0.0 dialer watch-list 1 delay route-check initial 60 dialer watch-list 1 delay connect 1 dialer-list 1 protocol ip permit ! nls resp-timeout 1 cpd cr-id 1 route-map clear-df permit 10 set ip df 0 ! ... View more

I have SCCP894x.9-4-2SR3-1 loaded on my phone and want to change it to SIP894x.9-4-2SR3-1 but I must be missing a step.  I am running CME 12 on a 2911 router.  Before I start with my config, how easy is it to have both SCCP and SIP versions of the same phone model number on a CME config?  I deleted the tftp stuff for 8945 SCCP files.  The SCCP phones work perfect.  I need to learn SIP which is why I am changing the phones. ! ip dhcp excluded-address 192.168.101.1 192.168.101.20 ip dhcp excluded-address 192.168.201.1 192.168.201.20 ! ip dhcp pool Users network 192.168.101.0 255.255.255.0 dns-server 1.1.1.1 default-router 192.168.101.1 option 150 ip 192.168.201.1 lease 0 12 ! ip dhcp pool Voice network 192.168.201.0 255.255.255.0 dns-server 1.1.1.1 default-router 192.168.201.1 option 150 ip 192.168.201.1 option 66 ip 192.168.201.1 lease 0 12 ! voice service voip ip address trusted list ipv4 72.999.999.999 allow-connections sip to sip no supplementary-service sip moved-temporarily no supplementary-service sip refer redirect ip2ip fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback none sip registrar server expires max 1200 min 300 ! voice class codec 1 codec preference 1 g711ulaw ! voice register global mode cme source-address 192.168.201.1 port 5060 max-dn 100 max-pool 20 load 8945 SIP894x.9-4-2SR3-1 authenticate register tftp-path flash: create profile sync 0017727297051011 ! voice register dn 10 number 3000 name SIP_Phone label SIP_Phone_1 ! voice register pool 10 busy-trigger-per-button 2 id mac 7081.0585.B908 type 8945 number 1 10 dtmf-relay sip-notify username user1 password cisco codec g711ulaw ! interface Vlan201 ip address 192.168.201.1 255.255.255.0 ip nat inside ip virtual-reassembly in ! tftp-server flash0:/PhoneFiles/8945SIP/BOOT894x.0-0-2-0.bin.sgn alias BOOT894x.0-0-2-0.bin.sgn tftp-server flash0:/PhoneFiles/8945SIP/SIP894x.9-4-2SR3-1.loads alias SIP894x.9-4-2SR3-1.loads tftp-server flash0:/PhoneFiles/8945SIP/SIP894x.9-4-2SR3-1.bin1.sgn alias SIP894x.9-4-2SR3-1.bin1.sgn tftp-server flash0:/PhoneFiles/8945SIP/SIP894x.9-4-2SR3-1.bin2.sgn alias SIP894x.9-4-2SR3-1.bin2.sgn tftp-server flash0:/PhoneFiles/8945SIP/SIP894x.9-4-2SR3-1.bin3.sgn alias SIP894x.9-4-2SR3-1.bin3.sgn tftp-server flash0:/PhoneFiles/8945SIP/SIP894x.9-4-2SR3-1.bin4.sgn alias SIP894x.9-4-2SR3-1.bin4.sgn tftp-server flash0:/PhoneFiles/8945SIP/SIP894x.9-4-2SR3-1.bin5.sgn alias SIP894x.9-4-2SR3-1.bin5.sgn tftp-server flash0:/PhoneFiles/8945SIP/SIP894x.9-4-2SR3-1.bin6.sgn alias SIP894x.9-4-2SR3-1.bin6.sgn tftp-server flash0:/PhoneFiles/8945SIP/SIP894x.9-4-2SR3-1.bin7.sgn alias SIP894x.9-4-2SR3-1.bin7.sgn tftp-server flash0:/PhoneFiles/8945SIP/SIP894x.9-4-2SR3-1.bin8.sgn alias SIP894x.9-4-2SR3-1.bin8.sgn tftp-server flash0:/PhoneFiles/8945SIP/SIP894x.9-4-2SR3-1.bin9.sgn alias SIP894x.9-4-2SR3-1.bin9.sgn tftp-server flash0:/PhoneFiles/8945SIP/SIP894x.9-4-2SR3-1.bin10.sgn alias SIP894x.9-4-2SR3-1.bin10.sgn tftp-server flash0:/PhoneFiles/8945SIP/SIP894x.9-4-2SR3-1.bin11.sgn alias SIP894x.9-4-2SR3-1.bin11.sgn ! telephony-service sdspfarm units 2 sdspfarm tag 1 TDCCONF sdspfarm tag 2 tdxcode conference hardware no auto-reg-ephone authentication credential user1 cisco max-ephones 20 max-dn 100 ip source-address 192.168.201.1 port 2000 service phone daysDisplayNotActive 1,7 service phone displayOnTime 08:00 service phone displayOnDuration 12 service phone displayIdleTimeout 00:10 service phone settingsAccess 1 service phone modeOfOperation 1 service phone displaywhebincomingcall 1 service phone webAccess 0 service phone ehookEnable 1 service phone displayOnWhenIncomingCall 1 system message DEMO_CME url services http://192.168.201.10/voiceview/common/login.do url authentication http://192.168.201.1/CCMCIP/authenticate.asp load 7921 CP7921G-1.4.1SR1 load 7935 P00503021900 load 7961 SCCP41.9-2-1S load 7962 SCCP42.9-2-1S load 7970 SCCP70.9-2-1S load 7971 SCCP70.9-2-1S load 7975 SCCP75.9-4-2SR3-1S load 7985 cmterm_7985.4-1-7-0 load 8941 cmterm-894x-sccp.9-2-2-0 load 8945 SIP894x.9-4-2SR3-1 ! Router#dir Directory of flash0:/PhoneFiles/ 153 -rw- 13182 Jun 11 2019 20:21:32 +00:00 XMLDefault.cnf.xml 8 drw- 0 May 30 2019 12:26:00 +00:00 7914 10 drw- 0 May 30 2019 12:26:00 +00:00 7915 12 drw- 0 May 30 2019 12:26:04 +00:00 7921 20 drw- 0 May 30 2019 12:26:08 +00:00 7925 30 drw- 0 May 30 2019 12:26:08 +00:00 7960 35 drw- 0 May 30 2019 12:26:12 +00:00 7961 44 drw- 0 May 30 2019 12:26:14 +00:00 7962 53 drw- 0 May 30 2019 12:26:16 +00:00 7965 62 drw- 0 May 30 2019 12:26:20 +00:00 7971 71 drw- 0 May 30 2019 12:26:22 +00:00 7975 79 drw- 0 May 30 2019 12:26:22 +00:00 7985 81 drw- 0 Jun 1 2019 20:23:36 +00:00 8945 139 drw- 0 Jun 11 2019 18:00:46 +00:00 8945SIP Directory of flash0:/PhoneFiles/8945SIP/ 140 -rw- 111552 Jun 11 2019 18:02:12 +00:00 BOOT894x.0-0-2-0.bin.sgn 141 -rw- 3145116 Jun 11 2019 18:03:04 +00:00 SIP894x.9-4-2SR3-1.bin1.sgn 142 -rw- 3145116 Jun 11 2019 18:03:26 +00:00 SIP894x.9-4-2SR3-1.bin2.sgn 143 -rw- 3145116 Jun 11 2019 18:03:52 +00:00 SIP894x.9-4-2SR3-1.bin3.sgn 144 -rw- 3145116 Jun 11 2019 18:04:18 +00:00 SIP894x.9-4-2SR3-1.bin4.sgn 145 -rw- 3145116 Jun 11 2019 18:04:44 +00:00 SIP894x.9-4-2SR3-1.bin5.sgn 146 -rw- 3145116 Jun 11 2019 18:05:08 +00:00 SIP894x.9-4-2SR3-1.bin6.sgn 147 -rw- 3145116 Jun 11 2019 18:07:34 +00:00 SIP894x.9-4-2SR3-1.bin7.sgn 148 -rw- 3145116 Jun 11 2019 18:08:02 +00:00 SIP894x.9-4-2SR3-1.bin8.sgn 149 -rw- 3145116 Jun 11 2019 18:10:04 +00:00 SIP894x.9-4-2SR3-1.bin9.sgn 150 -rw- 3145120 Jun 11 2019 18:11:02 +00:00 SIP894x.9-4-2SR3-1.bin10.sgn 151 -rw- 2453524 Jun 11 2019 18:13:34 +00:00 SIP894x.9-4-2SR3-1.bin11.sgn 152 -rw- 747 Jun 11 2019 18:13:54 +00:00 SIP894x.9-4-2SR3-1.loads 2096955392 bytes total (1831469056 bytes free) Router#deb tftp events TFTP Event debugging is on Router# Jun 11 22:40:57.640: TFTP: Looking for CTLSEP70810585B908.tlv Jun 11 22:40:57.676: TFTP: Looking for ITLSEP70810585B908.tlv Jun 11 22:40:57.720: TFTP: Looking for ITLFile.tlv Jun 11 22:40:57.888: TFTP: Looking for SEP70810585B908.cnf.xml Jun 11 22:40:57.920: TFTP: Looking for XMLDefault.cnf.xml Jun 11 22:40:57.920: TFTP: Opened system:/its/vrf1/XMLDefault.cnf.xml, fd 10, size 3687 for process 165 Jun 11 22:40:57.936: TFTP: Finished system:/its/vrf1/XMLDefault.cnf.xml, time 00:00:00 for process 165 ... View more