04-18-2011 01:17 AM - edited 03-16-2019 04:33 AM
In the SRST Admin Guide, I find the Translation profile can be apply to the Voice register pool under SIP SRST mode, but it doesn't work !! any one has idea about it?
Router(config-register-pool)#
voice translation-rule 1
rule 1 /1000/ /1006/
!
!
voice translation-profile 1
translate called 1
!
voice register pool xxx
translation-profile outgoing 1 <---------------- translation
11-28-2011 03:22 AM
Hi,
I meet the same issue.
Did you solve your issue?
Thank you
Best regards
11-28-2011 04:56 AM
Hi
There may be a bug here
You will need to look at the IOS version to see if you are affected
Status
Fixed
(Resolved)
Severity
3 - moderate
Last Modified
In Last Year
Product
Cisco IOS software
Technology
1st Found-In
12.4M
Fixed-In
12.4(22)YB
12.4(23.8)PI10
12.4(23.15)T1
12.4(23.15.1)PIX11
12.4(23.15.4)PIC1
12.4(24.5.1)PIX11
Component(s)
sip-srst
Also in the new BETA toolkit
It shows many other versions included as affected on IOS 15
HTH
Alex
Please rate useful posts
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide