01-31-2007 08:35 AM - edited 03-14-2019 07:49 PM
i have a 7912G ip phone with a sip firmware, and i want to upgrade it to SCCP firmware. Can i have this procedure .
Please help me
01-31-2007 09:00 AM
Take a look at the following link.
http://www.cisco.com/en/US/products/hw/phones/ps379/products_tech_note09186a0080094584.shtml
Hope this helps. If so, please rate the post.
Brandon
01-31-2007 09:47 AM
Hello,
thank you for help, but it's not the right procedure, because i have a 7912G, and inthe link i find just 7940/7960
Regards
01-31-2007 11:50 AM
Right, there are some caveats for the 7912. Take a look at this post.
Brandon
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide