Solved: SIP Trunk license to connect Audicodes with CUCM

svryo · ‎10-18-2021

Hello,

If I want to connect by SIP Trunk my CUCM 12.5 with an Audicodes Mediant 800B router, do I need a SIP Trunk license in the CUCM? The Audiocodes router would function as an SBC (Session Border Controller) to receive incoming and outgoing calls from Microsoft Teams to the CUCM.

Please help me and thanks in advance.

Jaime Valencia · ‎10-18-2021

There is no such thing as a SIP trunk license in CUCM, license is user based and the SIP trunks do not require any license in CUCM.

HTH

java

if this helps, please rate

View solution in original post

Jaime Valencia · ‎10-18-2021

There is no such thing as a SIP trunk license in CUCM, license is user based and the SIP trunks do not require any license in CUCM.

HTH

java

if this helps, please rate

mradell · ‎10-18-2021

You do not need licenses to configure a SIP trunk in CUCM.

If you were using a Cisco solution for your SBC (Cisco CUBE) you would need licenses on the CUBE.

Nithin Eluvathingal · ‎10-18-2021

As other members commented there is no TRUNK license in CUCM. This exist in traditional PBX and IP systems like Alcatel avaya etc..