12-27-2017 02:29 AM - edited 03-17-2019 11:51 AM
Dear Team,
I have a sip trunk between cisco UCM to Huwaei escape PABX,sip trunk between cisco to huwaei is up and call are going,but i am facing one way voice issue,98% calls i an facing the same audio issue.
Huwaei extension can hear my voice from cisco phone,but i cant hear voice from huwaei extension.
Any one please reply
Solved! Go to Solution.
12-27-2017 02:52 AM
The Cisco CallManager logs are needed: How to Collect Traces for CUCM 9.x, 10.x and 11.x
12-27-2017 02:40 AM
Is there a firewall between Cisco IP Phones (or CUCM) and the Huawei PBX? Can you attach SDL logs from CUCM for a specific call?
12-27-2017 02:42 AM
12-27-2017 02:52 AM
The Cisco CallManager logs are needed: How to Collect Traces for CUCM 9.x, 10.x and 11.x
12-27-2017 03:06 AM
12-27-2017 03:06 AM
12-27-2017 03:19 AM
First make a call and then gather CallManager logs for the last xx minutes.
12-27-2017 03:32 AM
12-27-2017 03:25 AM
12-27-2017 04:06 AM
12-27-2017 10:08 AM
Hello bro!, are you using a CUBE? it´s just that i see the following
CUCM 10.222.0.11
IP Phone 10.222.0.115
direct INVITE to "213.34.194.102"
Regards
Alexis
12-28-2017 04:22 AM
01-04-2018 12:01 AM
Please try to enable MTP (Media Termination Point) checkbox in Trunk Configuration settings on CUCM. This helped me.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide