08-13-2015 06:31 AM - edited 03-17-2019 03:59 AM
Hi All
Voice Gateway is configured as mgcp .
Issue is voicemail is not working in case on fallback. Pls see the below configuration :
I have CUCM 10.5 and Unity connection 10.5. Attached are the Unity snapshoots
!
no aaa new-model
clock timezone GMT 4 0
network-clock-participate wic 0
network-clock-select 1 E1 0/0/0
!
ip dhcp pool ipphones
network 192.168.210.0 255.255.255.0
default-router 192.168.210.1
option 150 ip 192.168.210.10
domain-name wr
!
ip domain name NLJcapital.kwi
ip cef
no ipv6 cef
multilink bundle-name authenticated
!
!
isdn switch-type primary-net5
!
cts logging verbose
!
voice-card 0
dspfarm
dsp services dspfarm
!
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
supplementary-service h450.12
fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback none
modem passthrough nse codec g711ulaw
h323
sip
bind control source-interface GigabitEthernet0/0
bind media source-interface GigabitEthernet0/0
registrar server expires max 600 min 60
no silent-discard untrusted
!
!
voice register global
mode srst
timeouts interdigit 7
max-dn 10
max-pool 40
!
!
voice translation-rule 7
rule 1 /^2/ /043652/
!
voice translation-rule 9
rule 1 /^1/ /91/
rule 2 /^2/ /902/
rule 3 /^3/ /903/
rule 4 /^4/ /904/
rule 5 /^5/ /905/
rule 6 /^6/ /906/
rule 7 /^7/ /907/
rule 8 /^8/ /98/
rule 9 /^9/ /9009/
rule 10 /^0/ /90/
!
voice translation-rule 10
rule 1 /^1/ /83041/
rule 2 /^2/ /83042/
rule 3 /^3/ /83043/
rule 4 /^4/ /83044/
rule 5 /^5/ /83045/
rule 6 /^6/ /83046/
rule 7 /^7/ /83047/
rule 8 /^8/ /83048/
rule 9 /^9/ /83049/
rule 10 /^0/ /83040/
!
voice translation-rule 11
rule 1 /^1/ /83651/
rule 2 /^2/ /83652/
rule 3 /^3/ /83653/
rule 4 /^4/ /83654/
rule 5 /^5/ /83655/
rule 6 /^6/ /83656/
rule 7 /^7/ /83657/
rule 8 /^8/ /83658/
rule 9 /^9/ /83659/
rule 10 /^0/ /83650/
!
!
voice translation-profile Add9
translate calling 9
!
voice translation-profile CALL-KWT
translate calling 10
!
voice translation-profile CALL-NLJBranches
translate calling 10
!
voice translation-profile change_calling
translate calling 7
!
!
!
!
application
global
service alternate default
!
!
hw-module pvdm 0/0
!
redundancy
!
!
controller E1 0/0/0
framing NO-CRC4
pri-group timeslots 1-31 service mgcp
!
ip ssh authentication-retries 5
ip ssh version 2
!
!
interface Embedded-Service-Engine0/0
no ip address
shutdown
!
interface GigabitEthernet0/0
ip address 192.168.210.11 255.255.255.0
duplex auto
speed auto
!
interface GigabitEthernet0/1
no ip address
shutdown
duplex auto
speed auto
!
interface GigabitEthernet0/2
no ip address
shutdown
duplex auto
speed auto
!
interface Serial0/0/0:15
no ip address
encapsulation hdlc
isdn switch-type primary-net5
isdn incoming-voice voice
isdn bind-l3 ccm-manager
isdn outgoing display-ie
isdn outgoing ie redirecting-number
no cdp enable
!
ip forward-protocol nd
!
no ip http server
no ip http secure-server
!
ip route 0.0.0.0 0.0.0.0 192.168.210.1
!
!
!
!
control-plane
!
!
voice-port 0/0/0:15
!
voice-port 0/1/0
!
voice-port 0/1/1
!
voice-port 0/1/2
!
voice-port 0/1/3
!
voice-port 0/2/0
!
voice-port 0/2/1
!
voice-port 0/2/2
!
voice-port 0/2/3
!
!
!
!
!
mgcp
mgcp call-agent 192.168.210.10 service-type mgcp version 0.1
mgcp dtmf-relay voip codec all mode out-of-band
mgcp bind control source-interface GigabitEthernet0/0
mgcp bind media source-interface GigabitEthernet0/0
mgcp behavior rsip-range tgcp-only
mgcp behavior comedia-role none
mgcp behavior comedia-check-media-src disable
mgcp behavior comedia-sdp-force disable
!
mgcp profile default
!
sccp local GigabitEthernet0/0
sccp ccm 192.168.210.10 identifier 1 priority 1 version 7.0
sccp ccm 192.168.210.11 identifier 2 priority 2 version 7.0
sccp
!
sccp ccm group 1
associate ccm 1 priority 1
associate ccm 2 priority 2
associate profile 1 register HQ-CONF
associate profile 2 register HQ-XCODE
!
ccm-manager music-on-hold
!
ccm-manager switchback immediate
ccm-manager fallback-mgcp
ccm-manager mgcp
ccm-manager config
!
dspfarm profile 2 transcode universal
codec g729abr8
codec g729ar8
codec g711alaw
codec g711ulaw
codec g729br8
codec g729r8
codec ilbc
codec pass-through
maximum sessions 3
associate application SCCP
!
dspfarm profile 1 conference
codec g729br8
codec g729r8
codec g729abr8
codec g729ar8
codec g711alaw
codec g711ulaw
codec ilbc
maximum sessions 2
associate application SCCP
!
dial-peer voice 1 pots
translation-profile incoming Add9
preference 7
destination-pattern 9.T
incoming called-number .
direct-inward-dial
port 0/0/0:15
forward-digits all
!
dial-peer voice 101 pots
translation-profile outgoing change_calling
preference 3
destination-pattern 9(050.......)
progress_ind setup enable 3
progress_ind alert enable 8
progress_ind progress enable 8
progress_ind connect enable 8
translate-outgoing calling 7
direct-inward-dial
port 0/0/0:15
!
dial-peer voice 102 pots
translation-profile outgoing change_calling
preference 2
destination-pattern 9([2,3,4,5]......)
progress_ind setup enable 3
progress_ind alert enable 8
progress_ind progress enable 8
progress_ind connect enable 8
translate-outgoing calling 7
direct-inward-dial
port 0/0/0:15
!
dial-peer voice 103 pots
translation-profile outgoing change_calling
preference 1
destination-pattern 9(0[2,3,6,7].......)
progress_ind setup enable 3
progress_ind alert enable 8
progress_ind progress enable 8
progress_ind connect enable 8
translate-outgoing calling 7
direct-inward-dial
port 0/0/0:15
!
dial-peer voice 104 pots
translation-profile outgoing change_calling
destination-pattern 9T
progress_ind setup enable 3
progress_ind alert enable 8
progress_ind progress enable 8
progress_ind connect enable 8
translate-outgoing calling 7
direct-inward-dial
port 0/0/0:15
!
dial-peer voice 165 pots
translation-profile outgoing change_calling
preference 3
destination-pattern 9(055.......)
progress_ind setup enable 3
progress_ind alert enable 8
progress_ind progress enable 8
progress_ind connect enable 8
translate-outgoing calling 7
direct-inward-dial
port 0/0/0:15
!
num-exp 2800 2824
!
!
gatekeeper
shutdown
!
!
call-manager-fallback
max-conferences 8 gain -6
transfer-system full-consult
ip source-address 192.168.210.11 port 2000
max-ephones 75
max-dn 152 dual-line
keepalive 20
voicemail 5000
call-forward busy 5000
call-forward noan 5000 timeout 20
!
!
!
line con 0
login local
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
stopbits 1
line vty 0 4
login local
transport input all
!
scheduler allocate 20000 1000
ntp master 2
!
end
NLJ-VG#
08-13-2015 09:13 AM
I don't see any DP to match your VM config.
08-13-2015 10:26 AM
Hi Jaime
Following configuration is not enough for voimail in fall back ?
call-manager-fallback
max-conferences 8 gain -6
transfer-system full-consult
ip source-address 192.168.210.11 port 2000
max-ephones 75
max-dn 152 dual-line
keepalive 20
voicemail 5000
call-forward busy 5000
call-forward noan 5000 timeout 20
!
Actually i follow the link
https://supportforums.cisco.com/discussion/10912606/srst-unity-connection-configuration
08-13-2015 10:33 AM
OK, then I suggest you review it again, because it clearly shows they have a matching DP for the target they configured for VM and call forward, which you don't have.
That would be assuming you're going to send calls over the PSTN to reach CUC, I'm assuming that's what you're doing, correct???
08-13-2015 04:56 PM
Both CUCM Unity Connection and Voice gateway (srst )a re on the HQ site. I want voice mail acces for phones in SRST & MGCP fallback.
Pls explain with rest of the configuration
Thanks
08-13-2015 04:56 PM
Hi Waqas,
The Call-manager-fallback exclusively works for SCCP Phones, are your phones SCCP only or mix of SCCP and SIP?
Regards
08-14-2015 07:54 AM
All phones are SCCP and ATA 190.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide