12-04-2017 10:26 AM - edited 03-17-2019 11:43 AM
I have a over 200 of SIP Phones registered in Branch with
C3945E-CME-SRST/K9 ISR G2 |
If i dont configure SIP SRST and only SCCP SRST, will the phones convert to SCCP when the CUCM is unreachable.
This is because the ISR G2 doesnt support CUBE with SRST SIP.
If they convert to SCCP, I will not add SCCP SRST as the nightmare of rejections from CUCM when the WAN link is restored is just to much.
Thanks for the help.
Solved! Go to Solution.
12-04-2017 11:40 AM
No, phones will use whatever protocol they are using with CUCM to register with SIP.
If you don't configure SIP SRST, then no phone running SIP will register.
12-04-2017 11:40 AM
No, phones will use whatever protocol they are using with CUCM to register with SIP.
If you don't configure SIP SRST, then no phone running SIP will register.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide