09-26-2013 10:58 AM - edited 03-16-2019 07:34 PM
Greetings all,
So I have 2 locations, one boston, one london. Boston has 1 pub,2 subs for cucm as wel as 2 UC. London has one UC. All phones register back to boston. The trunk to the london UC is sip. when we ran a SRST test, we could make outbound calls, inbound calls and inter office 4 digit calls. (SRST was working). When we tried to call the Unity Connection system, the UC answered but was tone deaf. it heard no DTMF.
All phones are SCCP
CUCM --> UC trunk is sip.
What needs to change in the vgw to have this work correctly.
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
no supplementary-service h450.2
no supplementary-service h450.3
no supplementary-service h450.7
supplementary-service h450.12
no supplementary-service sip moved-temporarily
no supplementary-service sip refer
fax protocol pass-through g711ulaw
h323
no h225 timeout keepalive
h225 timeout ntf 100
h225 display-ie ccm-compatible
call preserve
!
voice class codec 99
codec preference 1 g711alaw
codec preference 2 g711ulaw
codec preference 3 g729r8
!
voice class h323 99
h225 timeout tcp establish 3
h225 timeout setup 5
h225 display-ie ccm-compatible
!
!
voice class cause-code 1
no-channel
!
voice moh-group 1
moh WelcomeHome.au
multicast moh 239.1.1.1 port 2000 route 10.10.66.250
!
sccp ccm group 1
associate ccm 3 priority 1
associate ccm 2 priority 2
associate ccm 1 priority 3
associate profile 1 register CFBLondon
associate profile 2 register TXDLondon
associate profile 3 register MTPLondon
switchover method immediate
switchback method graceful
!
dspfarm profile 2 transcode
codec g729abr8
codec g729ar8
codec g711alaw
codec g711ulaw
maximum sessions 5
associate application SCCP
!
dspfarm profile 1 conference
codec g729br8
codec g729r8
codec g729abr8
codec g729ar8
codec g711alaw
codec g711ulaw
maximum sessions 5
associate application SCCP
!
dspfarm profile 3 mtp
codec g711ulaw
maximum sessions hardware 5
associate application SCCP
!
dial-peer voice 8930 voip
description *** Voicemail Pilot Unity Connection ***
preference 2
destination-pattern 8930
session protocol sipv2
session target ipv4:10.10.66.203
dtmf-relay sip-notify
codec g711ulaw
no vad
call-manager-fallback
secondary-dialtone 9
max-conferences 8 gain -6
transfer-system full-consult
timeouts interdigit 7
ip source-address 10.10.66.250 port 2000
max-ephones 100
max-dn 100 dual-line
default-destination 1701
voicemail 8930
call-forward busy 8930
call-forward noan 8930 timeout 16
moh WelcomeHome.au
multicast moh 239.1.1.1 port 16384 route 10.10.66.10
thanks in advance
09-26-2013 04:57 PM
Setting Up a Cisco Unified CallManager Express SIP Trunk Integration with Cisco Unity Connectio:
HTH
--
Jorge Armijo
Please remember to rate helpful responses and identify helpful or correct answers.
09-26-2013 06:50 PM
Set your DTMF to RTP-NTE.
Please rate replies and mark question as "answered" if applicable.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide