05-23-2017 06:59 AM - edited 03-17-2019 10:24 AM
We tested external incoming call to host site after taking the subscriber down and the call failed to directory number at the host site. I have all 3 subscribers configured on the gateway preference 1 for host subscriber , preference 2 for remote subscriber, and preference 3 for the other remote subscriber. What is missing?
05-23-2017 07:02 AM
Hi,
What is the connection between voice gateway and cucm nodes (sip or h323)? Have you tuned the timers? What is the pstn connection type?
05-23-2017 10:01 AM
Voice Gateway to CUCM h323. Not sure about tuning the timers. PSTN connection ISDN PRI.
We have a Publisher and 3 subscribers in our cluster. Location A has Publisher and Subscriber, location b has a subscriber, and location C has a subscriber. The 3 locations are connected via WAN Metro-E Network. Each location has it's own gateway connected to PSTN-PRI. Last week we had to perform maintenance at site C on the virtual host machine that the subscriber resides on. We tested calling to end device at that location externally and we could not reach the endpoint the call failed. Because we have the gateway at that location configured to failover to site A and or site B I expected the call to connect. On the gateway we have preference 1 local subscriber, Preference 2: site A subcriber, and Preference 3 site B subscriber. Is the path then go to site A to complete the call?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide