IP Telephony and Phones

Dears, I have run the cop files and also adjusted the low water mark and high water mark settings, also deleted the crash dump from the parttion but still the partition size does decrease,this is failing my upgrade to 11.5 from 9.1, how i can delete ...

Hello,  I have the CUCM version 11.5  we already implement everything and it is running and working fine I have already auto respond we someone call ex xxxx and press 1 or 2 what I want is how to change these messages ?? is it possible or I need to...

Hello Team, I have HQ and BR1 cluster.. they are able to register into respective forwarders.. but in RTMT I am not able to see any learning pattern.. Command used in router is as follows: service-routing xmcp listen ipv4 port 5050 client usern...

Hi, I've been messing with CFA for a few days now and getting nowhere fast. Speaking with the ITSP I can confirm they do not allow P-Asserted methods but they DO allow Diversion modifications to the SIP header. They are telling me that the issue is...

I was able to set up AnyConnect VPN for phones using certificates but for added security I would like to use Certificates + Username, password. I can't find anywhere where it is documented how to make the phone ask for a user name and password.  I di...

Cisco 3905 phone is hung intermittently, cannot be dialed and dial out any number. I am facing this issue from last months. Please suggest me how can i resolve this issue.

I have a 7945G which I have successfully flashed to SIP v9-4-2SR3 (it rejected v8.5.4) and registered with 3cx. Everything works with the exception of the time setting. I have <dateTimeSetting><dateTemplate>D/M/Y</dateTemplate><timeZone>Central Europ...

I'm having an issue where internal calls made to an extension ring the remote destination as configured, but when a translated call from the outside over a PRI comes in, the desk phone rings but the remote destination does not.  Any ideas why it woul...

Having trouble with SIP calls between 2 internal networks. Voice and data are on separate networks internally but they can communicate. We are trying to use a softphone app on a cellphone. it works fine when on an external network but when the phone ...

Dear Allwe have an issue with fxo portsour deployment isCUCM   ----H.323 GW with FXOOutgoing calls works fine ,but no incoming calls success .This Gateway in Tanzaniakindly find attached run config and debug commands

In CUCM 8.6+ how long does the audit log remain before its overwritten? Can this be changed in Enterprise parameters? I know you can grab them in RTMT but wasn't sure of the retention period. Thanks,