swap calls between DX650 and mobile

[Saeedi4cert]

Hello guys 

I have the following features need to be enabled on the endpoints, i need to check if this is applicable on DX650 and DX80, i need to know what is the required configuration to do that below points , regarding the 

- Video call and call swap between endpoints

- Presentation sharing during video calls (DX80)

- Proximity 

i checked the DX650 user guide , it mentioned clearly it can be done, here is the link

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cdce/dx600/user/10_1_1/english/DX60_BK_C6E8877C_00_cisco-dx600-user-guide-10_1_1/DX60_BK_C6E8877C_00_cisco-dx600-user-guide-10_1_1_chapter_010.html#DX60_TK_SBFC7D70_00

under 

Active Call Movement --> Switch Active Call From Mobile Phone to Desk Phone.

waiting your reply on that.

thanks on advance

[Atul Gaba]

Can be done if you configure Unified mobility. and enable the 'Move to mobile' option under remote destination setting.

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/10_0_1/ccmfeat/CUCM_BK_F3AC1C0F_00_cucm-features-services-guide-100/CUCM_BK_F3AC1C0F_00_cucm-features-services-guide-100_chapter_0110111.html#CUCM_RF_S0F999E7_00

-Atul