Can you please share the commands to check the status of the gateways.
As yesterday E1's was down, so verified by using show log | i Oct 22, show log | i down did not find any downtime, is their any commands to check the rootcause.
Please help me on the issue.
Well, if you need to check the E1 interface you can use "show controllers e1"
If you want to check the ISDN layers, if it's a ISDN circuit, you can use "show isdn status".
It depends on what you have on that Gateway.
Let us know what is the setup you have.
Sent from Cisco Technical Support Android App