ToD Routing From Call Handler

[jsmcniel88]

Hitting a mental road block just need a little help.

I need to create a ToD route so that a otion off of a menu will be redirected to a cell after hours.

So far I have:

Created my Time Period and Schedule

Created Partition PT_Off and associated that with the time period.

Created DN 16504 in the PT_Off parition and that DN is forwarding all to the cell.

Created HP 16504 in PT_INTERNAL (this is where all extensions are located) this currently rings 5 phones.

The Unity connection call handler for option 1 is sending to HP 16504

So I need to get the Call handler option 1 after 6 pm to ring to the DN 16504 in PT_off that is in Time period 6pm to 6am.

This is where I am stumped. Following the guide it tells me to place the PT off and on in a CSS. Not sure how this would work since it is coming from connection.

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_configuration_example09186a0080a7bc96.shtml#step3

Any advice on how I can proceed is welcomed.

[Chris Deren · Accepted solution]

It needs to be added to the CSS applied to UCON SIP trunk if using SIP integration or Voicemail Ports if using SCCP integration.

HTH,

Chris

[jsmcniel88]

Thank you. Adding to the CSS of the VM ports did the trick.