Hi,
I have an implementation where i Have a Lan interface without VRF (in picture x.x.101.100) and 2 Sip Trunks with different Wan interfaces on VRF SIP-CLX and SIP-CES.
Inbound, outbound calls everything works well signaling and audio without inserting MTPs, on both VRFs.
But if i configure a forward all on a phone, with the Outbound call on the same SIP trunk (SIP-CES) as the inbound call, and if do not insert MTP on CUCM, i end up with the 2 legs for the inbound and outbound Calls on the Wan SBCs (VRF SIP-CES x.x.59.132) and 2 call legs on the Lan interface (x.x.101.100) and i have no audio.
Is this possible? am i missing something?
Thanks
LL