Transform a "NIM-PVDM-32=" into a "NIM-PVDM-128"

[raziel1978kain]

Hello,

we have a "NIM-PVDM-32=" and a "PVDM4-128=".

We would like to know if, by replacing the "PVDM4-32" mounted on the "NIM-PVDM-32=" with the "PVDM4-128=", we can "transform" it into a "NIM-PVDM-128".

The idea is to avoid to buy a new "NIM-PVDM-128=".

TIA and regards.

[Roger Kallberg]

As long as you can swap out the DSP module that should work. AFAIK there is nothing that is different on the NIM level between a NIM-PVDM-32 or a NIM-PVDM-128, they just have different PVDM DSP module on them.

[raziel1978kain]

Hello @Roger Kallberg,

thank you for the information.

We have another question: what about mounting the "PVDM4-128=" above on a TDM module (e.g., a "NIM-1MFT-T1/E1="), but using then all the DSPs for transcoding, conferencing, etc., and not for TDM termination? Is it possible?

Regards.

[Roger Kallberg]

Yes it is.