Translation patterns and hunt pilot problem

[cristian.munoz]

Hi Guys

I have the follow problem: I have a Translation Patterns in the CUCM and in the Called Party Transform Mask option have a Hunt Pilot number, but not works.

If I put a DN, works fine.

Any idea?

TIA

Cristian

[Jonathan Schulenberg]

The Translation Pattern will have a CSS assigned to it. The Hunt Pilot must exist in a Partition included in the CSS chosen.

[cristian.munoz]

1.- The Translation Pattern have PT_Phone and CSS_PEK_LDI and Called Party Transform Mask to 1407

2.- Hunt Pilot is 1407 and have PT_Finanzas

3.- The extension into the LG have PT_Phone and CSS_PEK_LDI

4.- The CSS_PEK_LDI have PT_Phone and PT_Finanzas

5.- The CSS of GW have is CSS_PEK_LDI

Internal calls to Hunt Pilot works fine. External calls using the Translation Pattern not works.

TIA
Cristian

[SwathyEdayath]

Hi Cristian,

Did you get this problem resolved ? I too have the same problem now.

Tried translation both in gateway and CUCM, but no luck.

[cristian.munoz]

Dear SwathyEdayath

Has been long time but I think to solved adding the partition in the CSS incoming, into the GW configuration.

[SwathyEdayath]

Thank you. I too have resolved it some how..there was a translation present in gateway to different number which was overiding cucm configuration.

[cristian.munoz]

perfect..!!!! :)