03-22-2011 06:54 AM - edited 03-16-2019 04:05 AM
Hi,
I have this dobut, follow atached topology that i have to implement;
in this project i have to install one CME , configured on SITE A with phones SCCP and SIP running together , on SITE B there will be phones SCCP and SIP too, but there is not a CME in this SITE, only on SITE A
,The phones SCCP and SIP (SITE B) will be registred on CME of the SITE A.
How can i do this works?
.
TKS
03-22-2011 06:57 AM
Hello,
There is no problem with that as long as there is no big delay , on how to do it , as i am sure you already know this , the phones DHCP has the option 150 (tftp) make sure that there is routing for the voice vlan from side b to the cisco CME router on site A , they will work normally.
Amer
03-22-2011 07:17 AM
Tks Amer,
I asked this because i have to implement this scenario, but i´ve already configured the similar scenario in another customer, all works fine, except the function transfer calls on site remote (SITE B). When someone in SITE A transfer calls to SITE B works, but the users on SITE B transfer call to anyone, the calls down!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide