07-16-2007 09:50 PM - edited 03-14-2019 10:35 PM
Hi,
I got a doubt about de UC520, has somebody configure it to work with non cisco ip phones? and what protocols does the ip phones need to support?
07-17-2007 01:49 AM
Hi,
UC520 is the same software as IOS 12.4(11)XW, so yes non-cisco SIP phones will work as well the SCCP ones. Note that depending on your location the product is not expected to ship before october so check with your reseller.
Hope this helps, please rate post if it does!
07-17-2007 09:50 AM
Hi,
If I configure SIP phone from other vendors I have to pay for the license of those phones. or how does it works
07-17-2007 10:29 AM
There are no licenses for use of third-party SIP phones with CME.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide