UC Installation on VMWARE platform

[BALAMURUGAN SINGARAM]

In a existing customer setup they have the following hardware:

-------------------------

CPU TYPE - Intel(R) Xeon(R) CPU E5506

RAM - 6144 bytes.

Hard disk - 2 Numbers (80GB).

Platform - VMWare

-------------------------

CUCM 8.6 installed in the server, now they need to install Unity connection and presence in this same server, do the above hardware will support and do we need to upgrade RAM and hard disk for this requirement.

[ciscovoiceguy]

Hi,

Plese check the below link for system requirnment of UC 8.6 installtion on  Vmware

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/virtual/CUCM_BK_CA526319_00_cucm-on-virtualized-servers.html

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/install/8_6_1/install/cmins861.html#wp176453

Kindly rate if its helpful

Thanks

[Chris Deren]

In addition you did not specify what platform you are using, i.e. C200M3, etc and if this was spec based or TRC hardware, if you have the BOM of the server please post it, also let us know how many CUCM VMs and any other apps are running on the hardware.

HTH,

Chris

[BALAMURUGAN SINGARAM]

It is UC200M3, we have two CUCM running [ PUB & SUB ], customer have 70 workspace license , we need to install Presence and Unity conenction.

Please confirm do the UC200M3 will support CUCM, Unity Connection, Presence in singel server with 6 GB RAM.