11-10-2012 08:10 PM - edited 03-16-2019 02:07 PM
In a existing customer setup they have the following hardware:
-------------------------
CPU TYPE - Intel(R) Xeon(R) CPU E5506
RAM - 6144 bytes.
Hard disk - 2 Numbers (80GB).
Platform - VMWare
-------------------------
CUCM 8.6 installed in the server, now they need to install Unity connection and presence in this same server, do the above hardware will support and do we need to upgrade RAM and hard disk for this requirement.
11-10-2012 10:43 PM
Hi,
Plese check the below link for system requirnment of UC 8.6 installtion on Vmware
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/install/8_6_1/install/cmins861.html#wp176453
Kindly rate if its helpful
Thanks
11-11-2012 07:11 AM
In addition you did not specify what platform you are using, i.e. C200M3, etc and if this was spec based or TRC hardware, if you have the BOM of the server please post it, also let us know how many CUCM VMs and any other apps are running on the hardware.
HTH,
Chris
11-17-2012 12:08 AM
It is UC200M3, we have two CUCM running [ PUB & SUB ], customer have 70 workspace license , we need to install Presence and Unity conenction.
Please confirm do the UC200M3 will support CUCM, Unity Connection, Presence in singel server with 6 GB RAM.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide