05-05-2009 12:59 PM - edited 03-15-2019 05:51 PM
I had some problems with phones registered to my subscriber and had to reboot. Is it normal in real time monitoring tool for the replication status on the subscriber to be 0? Both the publisher and Cluster show a status of 2.
Solved! Go to Solution.
05-05-2009 01:10 PM
You might want to try a utils dbreplication reset all
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/cli_ref/7_0_1/cli_ref.html#wp62592
Give it about an hour or so and see what your replication status is.
Hope this helps! If you find this post useful, please rate it.
Thanks,
John
05-05-2009 01:10 PM
You might want to try a utils dbreplication reset all
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/cli_ref/7_0_1/cli_ref.html#wp62592
Give it about an hour or so and see what your replication status is.
Hope this helps! If you find this post useful, please rate it.
Thanks,
John
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide