UCM 7825 node and IME 7825 Node

[renji joy]

                   Hello Team,

What is the differents between  UCM 7825 node  and IME 7825 node in BOQ it is an license or server.please check

Thnaks & Regards

[Chris Deren]

UCM is Unified Communications Manager, IME is Inter-company Media Engine.  Both server different purpose. CUCM is your IP-PBX and IME allows you to integrate 2 companies' CUCMs to essentailly allow free calling between the 2 companies bypassing PSTN.

HTH,

Chris

[Aman Soi]

Hi Joy,

CUCM and IME are different components.For IME and Call Manager , u get two different PAKs installed on different servers.

IME is required for connecting different organisations through Internet rather than PSTN  by configuraing SIP TRUNKS.

regds,

aman

[renji joy]

I f we need only UCM pub and sub how many server required.

[Chris Deren]

CUCM as of version 9 is no longer tracking nodes so you can install as many Subs as you want (obviously you have to follow clustering guidelines such as 8 call processors max, etc).  Previous version such as 8.X node licenses were enforced but with CUWL licensee you get those for no charge, you just need to order the free node PAK.

HTH,

Chris

[renji joy]

            Please find below BOQ if we are using only CUCM how amny server required or server is include this BOQ

1	CUCM-USR-LIC	Top Level Sku For User License	1
2	LIC-CUCM-USR-A	Unified Communications Manager Enhanced Single User-Under 1K	50
3	UCSS-UCM-1-1-A	UC Manager Enh UCSS Less than 1K users - 1 user - 1 year	50
4	LIC-CUCM-BASIC-A	Unified Communications Manager Basic Single User-Under 1K	400
5	UCSS-UCM-BAS-1-1-A	UC Manager Basic UCSS Less than 1K users - 1 user - 1 year	400
6	PUBLIC-IP-DEV-ADD	Pub.Space non-app phone add-on lobby, conf. room phones	1
7	UCSS-PUB-1-1	UCSS for UCM Pub user for One Year - 1 user	1
8	UCM-7825-85	CUCM 8.5 7825	2
9	IME-7825-85	IME 8.5 7825	2
10	CCX-85-CMBUNDLE-K9	CCX 8.5 Promo Bundle available only with NEW CUCM or BE6000	1
11	CUCM-PAK	Include PAK Auto-expanding PAK for CUCM	1
12	CUCM-USR	Include PAK Auto-expanding User for CUCM	1905
13	IME-7825-85-KIT	IME 8.5 Media Kit	1
14	IME-7825-NODE	IME 7825 Node	2
15	IME-PAK	Include PAK Auto-expanding PAK for IME	1
16	UCM-7825-85-KIT	CUCM 8.5 Media Kit	1
17	UCM-7825-NODE	CUCM 7825 Node	2
18	UCSS-PUB-PAK	UCSS Public Space Devices Product Authorization Key	1
19	UCSS-UCM-BASIC-PAK	Include PAK Auto-expanding UCSS Basic PAK for CUCM	1
	UCSS-UCM-PAK	Include PAK Auto-expanding UCSS PAK for CUCM	1

[islam.kamal]

Hello

For CUCM MCS-7825 you can use two (one as publisher ) and other as subsriber . This is also based on customer needs and so on.

Thank you

please rate if this will help

[renji joy]

So we have to order MCS server seperate right.

Thanks and regards

[Aman Soi]

Hi Joy,

Please refer the Datasheet for IME which says

Cisco IME systems require three main components: a Cisco IME server, Cisco ASA 5500 Series Adaptive Security Appliances, and Cisco Unified CM 8.0 or Cisco Unified CM Session Management Edition 8.0.

http://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/vcallcon/ps10669/data_sheet_c78-601723.html

regds,

aman

[renji joy]

For this above BOQ how many MCS servers we have to order or servers already is there please avice me.

Thanks and regards

[Chris Deren]

Is this for new install? If so, why would you go with version 8.5 and not 9.1? Also, why would you install MCS servers if they are going to be end of life in version 10 and no longer supported. You should be either looking at UCS servers or spec based from other vendors.

HTH,

Chris

[renji joy]

Acually we has been ordered the licecnses long back as per customer recomendation so please guide us how many MCS servers rquired for the above BOQ.

Thanks in advance

[Chris Deren]

Bill of Materials should be build based on system requirements, so whoever built it should have listed count for each item. Number of servers depends on your requirements, i.e. how many phones, users, are severs to be split between data centers, number of sites supported, etc.  You need to go through the system sizing to determine optimal number of servers as this is not a wild guess.

Chris

[ronpatel]

HI

I would suggest you to open case at cisco.com/go/ph. It is free service to Cisco partners. PH team will be able to give you correct and authentic answer.

Regards
Ronak Patel

Rate all helpful post by clicking stars below the answer.

[renji joy]

Please find below list.in normal scnario we need IME node or not ?

UCM-7825-NODE  Nos 2

IME-7825-NODE     Nos 2