Forum,
I am trying to determine the IP address(es) of the UCM cluster servers. Using the UCM Data Dictionary and tables such as 'processnode' will provide information such as
procnodename description isactive macaddr procnodeid systemnode typenodename typeprocessnode
================================= ========================== ======== ======= ========== ========== ============ ====================
EnterpriseWideData t 1 t Subscriber CUCM Voice/Video
usa109-s4pub01 UCM 10.0 Publisher t 2 f Publisher CUCM Voice/Video
usa109-s4sub01 UCM 10.0 Subscriber t 3 f Subscriber CUCM Voice/Video
usa109-s4cup01.lab.shoregroup.com UC Presence 10.0 Publisher t 9 f Publisher CUCM IM and Presence
usa109-s4cup02.lab.shoregroup.com UC Presence 10.0 Publisher t 11 f Subscriber CUCM IM and Presence
'callmanager' table does not provide a field for IP...'processnode' only had 'ipv6name' field...
If the node using DNS to resolve name-to-IP as shown above...I have not found a way to obtain the IP address of the UCM node itself. I know I can go to the CLI of a node a issue a command to obtain...but I have not found a Data Dictionary table to obtain the results.
I am open for suggestions...thx.