cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
591
Views
5
Helpful
2
Replies

UNITY AIM-CUE GUI Error: Included servlet error: 500

gregorygout
Level 1
Level 1

Hi,

I have a CME 4.2 on a router 2811 with an AIM-CUE 1GB on it. I currently have the unity version 2.3.4

- Installer 2.2.1

- Thirdparty 2.3.2

- Bootloader (Primary) 2.1.2

- Infrastructure 2.3.4

- Global 2.3.4

- Service Engine license 1.20 2.1.2

- Auto Attendant 2.3.0

- Voice Mail 2.3.2

- Bootloader (Secondary) 2.1.2

- Core 2.3.4

- GPL Infrastructure 2.3.0

Installed Languages:

- British English 2.3.0

I have tried to upgrade remotely to version 3.0.1, it didn't go well. at that point everything was still working fine, and I decided to restore my backup config+data just in case.

when I rebooted the AIM-CUE, it came up with the following error on the GUI 4.1

under Voice Mail > Prompts

Included servlet error: 500

Location: /Web/WEB-INF/screens/main.jsp

Error Location: /Web/WEB-INF/screens/sa2/ListPrompts.jsp

Internal Servlet Error:

see the whole error in attachment

after verification on the GUI, I am missing all the factory scripts

aa.aef

aasimple.aef

checkaltgreet.aef

msgnotify.aef

promptmgmt.aef

setmwi.aef

voicebrowser.aef

xfermailbox.aef

and I have the error message instead of these prompts

AABusinessClosed.wav

AABusinessOpen.wav

AAHolidayPrompt.wav

AASPlayExtensions.wav

AAWelcome.wav

and I have currently no script installed.

when callers tries to go to voicemail at the minute, it goes to a script which tells them a technical error has occured.

Does anybody know where I can find these factory scripts(I have looked on the cisco sites and the sample scrips seems different)?

Do I need to do a complete unity reinstallation ?if yes, can it be done completely remotely?

have you ever seen this error ?

Any help very appreciated!

Thank you,

Gregory Gout

2 Replies 2

j-block
Level 4
Level 4

Try reinstalling the unity again. if it does not work out try replacing the flash memory in the router.

Hi,

thank you for your response.

It is what I had to do in the end, and it solved it.

I had a corrupt pkg..