Hi Nithin,
Can you check these settings in CUC for the "Secondary" server config. This would add the Sub
to the list of available CUCM servers
Step 32 On the Edit Servers page, do the following substeps if the Cisco Unified CM cluster has secondary servers. Otherwise, skip to Step 33.
##
a. Under Cisco Unified Communications Manager Servers, click Add.
##
b. Enter the following settings for the secondary Cisco Unified CM server and click Save.
#
# Table 6-16 Settings for the Cisco Unified Communications Manager Servers
# Field | # Setting |
---|
# Order | # Enter the order of priority for the Cisco Unified CM server. The lowest number is the primary Cisco Unified CM server, the higher numbers are the secondary servers. |
# IP Address or Host Name | # Enter the IP address (or host name) of the secondary Cisco Unified CM server. |
# Port | # Enter the TCP port of the Cisco Unified CM server that you are integrating with Cisco Unity Connection. We recommend that you use the default setting. |
# TLS Port | # Enter the TLS port of the Cisco Unified CM server that you are integrating with Cisco Unity Connection. We recommend that you use the default setting. |
# Server Type | # Click Cisco Unified Communications Manager. |
http://www1.cisco.com/en/US/docs/voice_ip_comm/connection/7x/integration/cucm_sccp/guide/cucintcucmskinny050.html
Cheers!
Rob
"May your heart always be joyful
And may your song always be sung
May you stay forever young "
- Dylan