cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1493
Views
0
Helpful
3
Replies

Unlock Network Settings in 7920

CSCO10881587
Level 1
Level 1

Hi everybody !!!

Please help me out for unlocking the Network Setting/ DHCP Settings in Cisco 7920 Wireless IP phone..

Renjith.M

3 Replies 3

Rob Huffman
Hall of Fame
Hall of Fame

Hi Renjith,

Have a look at this doc to get you started;

Configuring Network Settings on the Cisco Wireless IP Phone 7920

http://www.cisco.com/en/US/products/hw/phones/ps379/products_administration_guide_chapter09186a008024b004.html#wp1085908

Hope this helps!

Rob

Thanks for your reply Mr.Rob,

This is a brand new phone, the admin access to the phone is disabled. I think it should be unlock to re-configure with static IP as it is configured as DHCP client by default. I tried to unlock it by pressing *## after pressing the menu button and then the Dial button(green). But it doesn't gave me the option to enable/disable DHCP. Although I will be able to administer some other old 7920 phones through the same way mentioned above. I noticed that the Firmware version differs from the old, the new phone firmware version is 7920-40-03-00.

Could you please provide the lock code for this firmware version...

Thanking you all...

Renjith

Please help me out for the issue..

Thanks in advance..

Renjith