Update language IP Phone from CUCM 12.5

[Juraj Papic]

Hi all,

Please can you share the procedure to install and upgrade the language for Ip phone.

thanks.

[TONY SMITH]

In CUCM the term "Locale" is used.   You need to install the desired Locale onto all the CUCM servers, it needs to match CUCM Majour and Minor version (ie 12.5 in your case).  Download from here if you haven't got it already ..

https://software.cisco.com/download/home/286322286/type/282074333/release/12.5(1.4000)

Install on the Publisher first, then each Subscriber.  Reboot each server to complete the process.

You can apply the Locale either on a phone by phone basis under "User Locale", or in a Common Device Configuration from which the members will inherit it.  Depends on how you've set your system.  Network Locale can be applied to the device pool, or again phone by phone.

[Juraj Papic]

Hello Tony,

Do you know any video where I can see from the upload to the changes in the  phone device?

thanks.

[TONY SMITH · Accepted solution]

Sorry, I don't really do video.  Here's the documentation for phone configuration ...

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/12_5_1/admin/cucm_b_administration-guide-1251/cucm_b_administration-guide-1251_chapter_0101.html

If you don't yet have the Locale installed on the servers, the release notes on the download page should cover the basics.  Also have a look here ..

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/install/12_5_1/cucm_b_install-guide-cucm-imp-1251/cucm_b_install-guide-cucm-imp-1251_chapter_011.html#reference_998701BF62E64B40F98CA1DC7D55CFA6

and here ..

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/configExamples/CUCM-Locale-FAQ.html