Very Urgent !!!!!!!!!!! SNMP Enable on IP Phone

[cisco.madhab]

Dear all.

I am using Cisco 7931 & 7911 IP Phone with CCM 6.1 in my IPT Network.

I want to monitor all IP Phones through NMS. But for that Could not find any option for enable the SNMP on IP Phone.

Any body can help me for resolve this problem.its very Urgent...

Thanks & Regards

Madhab

[James Hawkins]

Cisco IP phones do not support SNMP

[Michael Owuor]

One can get SNMP traps pertaining to the phones by configuring and monitoring the CUCM node and leveraging the CISCO-CCM-MIB.

One of the traps defined for CUCM is ccmPhoneStatusUpdate which provides notification if there is at least one entry in the ccmPhoneStatusUpdateTable, which keeps track of the registration status of the phones.

http://tools.cisco.com/Support/SNMP/do/BrowseOID.do?local=en&translate=Translate&objectInput=ccmPhoneStatusUpdateTable

More information about monitoring the health of the system is available in th CUCM Managed Services Guide:

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/managed_services/ManagedServices.html

Hope this helps.

Regards,

Michael.