We need to replace over 80 of our VG 248 with VG 320s. I have just begun the he process of migrating off our vg248s. It is very tedious to configure every port on the 320s manually to mimic the 248s, also a potential for error. I know a little about bulk admin but I wasn't sure if there was a process to perform this migration using the .bat process or if there is another way to do this. I read on tech boards in my research there was a way but could not find the specifics.
Essentially we just want to mass migrate the 248's CUCM configs to the 320s without having to do them one by one.
We are currently running a cluster of CUCM System version: 9.1.2.13073-1
