11-04-2010 09:19 AM - edited 03-16-2019 01:44 AM
I am trying to setup the VG202 to work with call manager. So far I can make calls from the VOIP telephones registered with the call manager to the phone connected to the VG202. When I talk into the VOIP telephone I can hear voice on the Analog telephone, but when I talk into the Analog phone I cannot hear the voice in the VOIP telephones. Also I can't dial anything from the Analog telephone connected to the VG202. Below is the config I have setup on the VG202. Can anyone please show me what i am doing wrong?
Building configuration...
Current configuration : 1550 bytes
!
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Router
!
boot-start-marker
boot-end-marker
!
logging message-counter syslog
!
no aaa new-model
ip source-route
no ip routing
!
!
!
!
no ip cef
no ipv6 cef
!
stcapp ccm-group 1
stcapp
!
stcapp feature access-code
!
stcapp feature speed-dial
!
!
!
!
!
!
voice rtp send-recv
!
voice service pots
!
voice service voip
fax protocol t38 nse force ls-redundancy 0 hs-redundancy 0 fallback cisco
!
!
!
!
!
!
!
!
!
!
!
!
!
voice-card 0
!
archive
log config
hidekeys
!
!
!
!
!
interface FastEthernet0/0
ip address dhcp
no ip route-cache
duplex auto
speed auto
!
interface FastEthernet0/1
no ip address
no ip route-cache
shutdown
duplex auto
speed auto
!
ip forward-protocol nd
!
no ip http server
!
!
!
control-plane
!
!
!
voice-port 0/0
timeouts initial 60
timeouts interdigit 60
timeouts ringing infinity
caller-id enable type 1
!
voice-port 0/1
!
ccm-manager fax protocol cisco
ccm-manager config server 10.10.0.8
ccm-manager sccp local FastEthernet0/0
ccm-manager sccp
!
mgcp fax t38 ecm
!
sccp local FastEthernet0/0
sccp ccm 10.10.0.8 identifier 2 version 4.1
sccp ccm 10.10.0.9 identifier 1 version 4.1
sccp
!
sccp ccm group 1
associate ccm 1 priority 1
associate ccm 2 priority 2
!
!
dial-peer voice 1000 pots
!
dial-peer voice 999000 pots
service stcapp
port 0/0
!
!
!
line con 0
no modem enable
line aux 0
line vty 0 4
login
!
exception data-corruption buffer truncate
end
Solved! Go to Solution.
11-08-2010 01:24 PM
You have following in the config that needs to be removed:
no ip routing
but before you remove that aka configure "ip routing" you must
add a default route (else you'll lose IP connectivity to the box!)
some thing like...
ip route 0.0.0.0 0.0.0.0
that will fix it.
11-08-2010 01:24 PM
You have following in the config that needs to be removed:
no ip routing
but before you remove that aka configure "ip routing" you must
add a default route (else you'll lose IP connectivity to the box!)
some thing like...
ip route 0.0.0.0 0.0.0.0
that will fix it.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide