VG224 call pickup issues

[Bobby Villegas]

Hi,guys. I have a vg224 running mgcp with a ccm(4.1.3sr3). I have configured pickup groups in ccm, but I can not get the analog stations to access the pickup group assign to them. Is there a way or some config I can do on the vg224 to make this to work. Thanks bv

[sbilgi]

This can be done only when VG224 has SCCP Controlled Analog (FXS) Ports. With MGCP, the pickup groups will not work on VG224. http://www.cisco.com/en/US/products/ps6441/products_feature_guide09186a0080483a76.html

[Bobby Villegas]

Hey sbilgi,

Thanks. I did revert to sccp ,not mgcp, and it worked. Thanks for the reply.