VG248 Calling Party Control?

[jamesleewright]

Hello,

I have a VG248 port connected to an analog elevator phone. Does anyone know if the VG248 can do CPC or Wink signal? I need the line to be able to disconnect when it the other end disconnects and it reciveves a fast busy or dial tone. thanks

[acampbell]

Have a look at this link:-

http://www.cisco.com/en/US/docs/voice_ip_comm/vg248/1_3_1/english/configuration/guide/vg248swv.html#wp1028979

Try drop loop current.

Regards,
Alex.
Please rate useful posts.

[jamesleewright]

Thanks. I've tried that. But from the document it seems that Call Supervision Method on the VG sends the drop loop current if the VG phone disconnects first. My issue is the called party disconnects first

[kdotten36]

Did you find a solution? I'm currently troubleshooting this as well for certain models of elevator phones we're migrating from Avaya to Cisco.