VG248's & SRST

[Lewis Murray]

Hi,

I am setting up a remote site, this will have two VG248's (approximately 80 ports used) and 30 7962's. I am planning on using SRST v4.3 for this. I am not sure if each device on the VG248 counts as a phone hence not sure what router to go for. I have tried searching for this information but can't seem to find it anywhere. Any assistance greatly appreciated!

Cheers,

Lewis

[Rob Huffman]

Hi Lewis,

During Cisco CallManager fallback, Cisco SRST considers the Cisco VG248 to be a group of Cisco IP phones. Each of the 48 ports on the Cisco VG248 is treated by Cisco SRST as a separate Cisco IP phone.

From this good SRST Overview;

http://www.cisco.com/en/US/docs/voice_ip_comm/cusrst/admin/srst/configuration/guide/srs_over.html

Hope this helps!

Rob