10-25-2012 02:16 PM - edited 03-16-2019 01:53 PM
Has anyone had any experience connecting a VG350 to a switch stack? I see that there's an option to create a port-channel, but I can't configure the interfaces with the "channel-group" command. Ideally I'd like to have a cross-stack etherchannel (layer 2) with layer 3 connectivity to a loopback interface; regardless I'd like to have a redundant solution in place. In theory we could utilize a BVI but that's not a road I want to go down right now.
Any suggestions are appreciated.
06-05-2014 07:50 AM
I'm hitting the same limitation. I wonder if there were VG code improvement since you posted this on the forum...
Thansk!
-Carl
06-05-2014 08:15 AM
I ended up connecting the interfaces back to the stack via L3 connections then injected my loopback address into the routing process. It's not the straight L2 connection I wanted but it works.
11-30-2016 08:13 AM
Looks like there is a Data license needed.
SL-VG350-DAT-K9
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide