07-08-2010 02:25 AM - edited 03-15-2019 11:36 PM
Hi Outthere,
We've tow CUCM Cluster connected via a Inter-Cluster Trunk (Non-Gatekeeper Controlled). We use the Option Media Termination Point Required.
An Cisco IOS Enhanced Software Media Termination Point works on both sides.
For audio-calls everything works fine!
Now we want to use video-call.
The MTP is in passthrough mode.
Regions und Locations are also conigured.
What else do we need and what are the options to troubleshoot it?
Solved! Go to Solution.
07-08-2010 06:49 AM
Cisco Unified CM Release 5.0 introduced audio transcoding resources based on Cisco IOS Enhanced Media Termination Point, which are able to support transcoding the audio stream of a video call while still supporting the video stream via a pass-through codec. The pass-through codec is used only for the video stream because the pass-through codec cannot be used for a stream that requires transcoding. The following three conditions must all be true for the pass-through codec to be used:
•The two endpoint devices have a matching CODEC capability.
•MTP Required is not checked for either endpoint.
•All intermediate resource devices (MTPs and transcoders) support the pass-through codec.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/6x/video.html
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk
07-08-2010 02:27 AM
Sorry I forgot some interresting details:
CUCM System version: 6.1.4.2228-1
MTP: Voice Router with Cisco IOS Software, 2800 Software (C2800NM-IPVOICEK9-M), Version 12.4(24)T3
dspfarm profile 9 mtp
description MTP for ICT passthrough and G729r8
codec pass-through
codec g729r8
maximum sessions software 100
associate application SCCP
07-08-2010 06:49 AM
Cisco Unified CM Release 5.0 introduced audio transcoding resources based on Cisco IOS Enhanced Media Termination Point, which are able to support transcoding the audio stream of a video call while still supporting the video stream via a pass-through codec. The pass-through codec is used only for the video stream because the pass-through codec cannot be used for a stream that requires transcoding. The following three conditions must all be true for the pass-through codec to be used:
•The two endpoint devices have a matching CODEC capability.
•MTP Required is not checked for either endpoint.
•All intermediate resource devices (MTPs and transcoders) support the pass-through codec.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/6x/video.html
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk
07-12-2010 07:09 AM
Thanx for your help!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide