voice register monitoring using CP7915

[nallan987]

First some data on my hardware:

1. Our reception phone is a Cisco 7942 and it has a CP7915 expansion unit attached. This expansion unit is set up and working. This unit is configured as ephone dn and ephone.
2. Our desk phones are Cisco CP-7821 handsets. They are configured as voice register dn and voice register pool.

I am trying to get the CP7915 module to monitor the voice register extensions but it seems that you can only add ephone dn's to it. Is it possible to have the CP7915 module monitor voice register lines or am I wasting my time? I am basically just learning and have no real training on this so if I have some of the nomenclature incorrect l apologise in advance.

Thank you.

[Carlo Poggiarelli]

Hi

Please post your iOS version and platform.

Also attach your actual config

Thanks

Regards

Carlo

[nallan987]

Hi Carlos thanks for the reply. I am running 15.4 on a Cisco 3925.

which part(s) of the config did you want to see specifically?

[Carlo Poggiarelli]

Hi.

the output of a show run | s voice register and a show run | s ephone would be enough.

Thanks

Cheers

Carlo

[Carlo Poggiarelli]

Hi.

On your config add these lines if not present.

conf t

presence

max-subcription 100

allow subscribe

presence call-list (to add presence on missed/received/placed calls

under voice register dn X

add 

allow  watch

HTH

Regards

Carlo