Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
I purchased a CP-8851 phone to replace my SPA-942 which has a damaged display but is still working over SIP. I've searched through the Cisco PDFs, both User Guide types and Admin and Maintenance and there is no mention of configuring the device to s...
I need a good 3rd party app for CDR that can has an easy to navigate portal or dashboard and that can be used to schedule reports and send them via email to necessary people. I also need support for multiple cluster reporting in the same app. Does a...
I would like to point our callmanager to the root of our one domain and filter out everyone that doesn't have anything configured in the iphone attribute. Has anyone done this or know if it is possible? If so, can you please provide the filter necess...
We migrated a 7.15 Cluster to 9.1(2) with 5 subscribers. When we make changes to phones that were migrated, the changes don't take effect. If we create new IP Phones, we can make any type of change and things work perfectly.One weird fact about cha...
Is there any benefit to use Enhanced location in single CUCM cluster ? I know that when we are using this feature with multiple CUCM cluster then we can save lots of bandwidth but i am not sure about Single cluster . I have around 40+ physical locati...
Looking for a way to change the font color on the phone line text labels on 7900/8900 series phones. Anyone know if it's possible?
Hi All ,I read through the CCM SDI logs. Just want to know some info on CCM traces on acadamic purposes.Below lines are from sdi traces of SIP trunk call.23:30:57.392 |DET-MediaExchange-(95)::fillAudioMediaInfo, partyIdx=0, xferMode=16, codec=15, max...
Any Video/SIP experts able to provide some advice?Call flow is endpoint > CUCM (9.1.2) > SIP > CUBE (15.4(2)T1) > SIP > ITSPI'm getting dropped video on calls made through the CUBE after an intermittent time between 20 and 120 minutes. When the vide...
Hi guys, I have an issue with incoming calls, when I make a call from an external phone I hear a ringtone but the IP Phone doesn't ringAny help please Thank you
HiEnvironnement CUCM 10.5Unity Connection 11.0Backdoor number 123-555-1212 that I called from 123-555-1111 then it goes to AA in Unity I then compose the extension I want to reach 4444, no problem so far everything is OK.But the extension 4444 is con...
We are getting ready to update from CUCM 9.1 to CUCM 10.5In preparation for this We used BAT to update the phone firmware on roughly 600 phones.After the update we realized that a few phones didn't update.For example, we updated our 7911 phones which...
Good day,I have a group of users using the Cisco 7945G, one of them will like to setup his own voicemail recording (in case of absence) that indicates the caller to press a key # in order to have the call transferred to his personal cellphone. I have...
Hello,I'm curious if anyone here might be able to offer some tips on any possible workarounds for the following:We are using the Informacast appliance for our paging needs (located at our HQ). We have a total of 3 sites (HQ and 2 remote sites). Each ...
Hi Guys, I am tried to configurate BLF about CUCM 7.1.3.32900-4, but, in phone button template don´t appear in the option <Unassigned Associated Items> the button Add a new BLF SD I did the same test in the CUCM 7.1.3.20000-6 and worked fine. In th...
Hi Guys, Could anyone recommend a wireless headset that is compatible with the Cisco 7962g? The other option I'm looking into is purchasing a new wireless handset to replace the 7962g. If someone could recommend one that is compatible with CUCM 7.1...
