VOIP Cant get "Controller command" or "card type {e1 | t1} " on 2911

[yamikani2g2]

Good day team.

I don't seem to get my Router to work right. we have a 2911 ISR router with  c2900-universalk9-mz.SPA.155-3.M5.bin as the IOS running. We want to activate evaluation voice bundle. We have an E1 card slotted we want to do a demo test to our team. We cant get the following commands to work. The E1/T1 cards that we have is VWIC2-2MFT-T1/E1.

card type {e1 | t1} slot subslo

voice-card slot

controller {e1 | t1} slot / port

When we do sh diag we can see the VWIC card. 

1. Could someone assist with how we can activate the eval Licenses mainly the voice ones.

2. Could someone advise why the commands above are not working?

Will appreciate the help.

[Aman Soi]

Hi,

You can visit the www.cisco.com/go/license and generate demo licenses .

Get Devices---Demo & Evaluation --routers & switches --cisco ISR G2 Temporary Licenses ---Unified Communication license for 2900/3900 series .

enter ProductID and Serial Number to get 60 days eval license.

Product ID , u can get from show license udi in router.

The commands not working could be due to UC license not loaded on router.

you can also refer the link

http://www.cisco.com/c/en/us/td/docs/routers/access/sw_activation/SA_on_ISR.html

regds,

aman

[Abhay Singh Reyal]

When you order a new ISR G2, it is shipped with the software image and the corresponding permanent licenses for the packages and features that you specified, pre-installed. 

Use the Cisco management application such as Cisco License Manager (CLM), or use the Cisco IOS show license command to determine the licenses activated on your system. CLM is a free software application available at http://www.cisco.com/go/clm.

The router comes with an evaluation license, also known as a temporary license, for most packages and features supported on the router.

If licenses are not activated, so kindly follow as advised by Aman.

Regards

Abhay