02-01-2013 02:35 AM - edited 03-16-2019 03:29 PM
Hi,
I have a 2811 ISR with 12.4 IOS running on it. I have inserted VWIC-1MFT-E1= on the ISR and it is getting detected. In show inventory the
VWIC-1MFT-E1= is showing up. But it is not coming up.
Thanks
Fawaz
02-01-2013 02:41 AM
Hi
What do you mean by not coming up? Is the controller is not coming up.
regards
Ronak patel
rate helpful posts.
02-01-2013 02:46 AM
Hi Ronak,
Thanks for the reply.
Yes I mean the controller is not coming up.
02-01-2013 02:48 AM
Hi
It can be number of issues when controller is not coming up.
1) Service provider issue
2) E1 Cable issue
3) Clocking issue.
etc
Send us the configuration and send the show controler output after clearing the counter.
Regards
Ronak patel
Rate helpful posts.
02-01-2013 03:41 AM
Hi Ronak,
This is a test environment and I am not terminating any PRI. I am using loopback to test the e1 card. Now the amber light is glowing on the e1 card, but if I plug in the loopback it should come up and green light should glow.
Right now the router is down. I cant take the configs. I will update once its up and running.
Thanks Ronak for the support.
02-01-2013 09:22 AM
Please post you configuration.
Chris
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide