cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1430
Views
10
Helpful
4
Replies

Conection problems in a network with a webserver and 4 hosts IPv6

etroncho555
Level 1
Level 1

Hello everyone !

 I can not send a paquet among the server and anyone of the hosts, neither among hosts

Thanks a lot

4 Replies 4

Martin L
VIP
VIP

I guess u did a typo error, FDEE instead of just DEE ?  PC 2 and 3 can ping PC0;  Server IP is FDEE:1413:6B37:F522::1, PC0 is DEE:1413:6B37:F522::2;  PC1 is DEE:1413:6B37:F522::3, etc Network address is different;  PCs are on different subnet, which means u need some sort of L3 device to do routing.

 

Regards, ML
**Please Rate All Helpful Responses **

Hi Martin,

You are right Martin, i have an error with the ips, but still i can not conect with the diferent devices.

I do not have an idea why

Thanks

 

ping works if you ping from CMD of PC but not from PT GUI feature; open PC 0 CMD window and type in

ping FDEE:1413:6B37:F522::5

you should get

Pinging FDEE:1413:6B37:F522::5 with 32 bytes of data:

 

Reply from FDEE:1413:6B37:F522::5: bytes=32 time=1ms TTL=128

Reply from FDEE:1413:6B37:F522::5: bytes=32 time<1ms TTL=128

 

Regards, ML
**Please Rate All Helpful Responses **

Hi Martin,

I did it like you coment and works.

I am usin the free Packet Tracert version 8.1.1.0022 and i think it works worse than others before.

Thanks Martin.

Review Cisco Networking for a $25 gift card