02-06-2023 03:12 PM
Hello everyone !
I can not send a paquet among the server and anyone of the hosts, neither among hosts
Thanks a lot
02-06-2023 11:41 PM
I guess u did a typo error, FDEE instead of just DEE ? PC 2 and 3 can ping PC0; Server IP is FDEE:1413:6B37:F522::1, PC0 is DEE:1413:6B37:F522::2; PC1 is DEE:1413:6B37:F522::3, etc Network address is different; PCs are on different subnet, which means u need some sort of L3 device to do routing.
Regards, ML
**Please Rate All Helpful Responses **
02-07-2023 01:24 AM
02-07-2023 07:24 AM
ping works if you ping from CMD of PC but not from PT GUI feature; open PC 0 CMD window and type in
ping FDEE:1413:6B37:F522::5
you should get
Pinging FDEE:1413:6B37:F522::5 with 32 bytes of data:
Reply from FDEE:1413:6B37:F522::5: bytes=32 time=1ms TTL=128
Reply from FDEE:1413:6B37:F522::5: bytes=32 time<1ms TTL=128
Regards, ML
**Please Rate All Helpful Responses **
02-08-2023 12:57 AM
Hi Martin,
I did it like you coment and works.
I am usin the free Packet Tracert version 8.1.1.0022 and i think it works worse than others before.
Thanks Martin.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide