09-03-2008 06:59 AM
Is it possible on a ME3400 to copy or rewrite customer Cos into Service provider Cos on Dot1q tunneling port ?
thanks
Luc
04-22-2009 02:05 AM
I have configured the next class-map and policy-maps but I only can apply the service-policy in trunk ports. How Can I configure a service-policy in a access-port?
-----------------------------------
Class Map match-all COS7
Match cos 7
Class Map match-all COS6
Match cos 6
Class Map match-all COS5
Match cos 5
Class Map match-all COS4
Match cos 4
Class Map match-all COS3
Match cos 3
Class Map match-all COS2
Match cos 2
Class Map match-all COS1
Match cos 1
Class Map match-all COS0
Match cos 0
Class Map match-any VLAN
Match vlan 1-4094
----------------
policy-map MARCADO_ENTRADA
Class VLAN
service-policy MARCADO
Class class-default
policy-map MARCADO
Class COS1
set dscp 15
Class COS0
set dscp af11
set cos 4
Class COS2
set dscp af22
Class COS3
set dscp 25
Class COS4
set dscp af33
Class COS5
set dscp 35
Class COS6
set dscp cs5
Class COS7
set dscp 45
----------------
!
interface FastEthernet0/1
description # Conex ANILLO con 3400_1
port-type nni
switchport mode trunk
logging event spanning-tree
logging event status
storm-control broadcast level 0.50
storm-control multicast level 0.50
storm-control action trap
no cdp enable
service-policy input MARCADO_ENTRADA
ip dhcp snooping trust
end
When I apply the service-policy input in the fa0/1 and I send traffic I can't see any COS traffic.
Could you help me to configure this??
Why I can see traffic in the interface?
SW_3400_2#sh policy-map interface fa0/1
FastEthernet0/1
Service-policy input: MARCADO_ENTRADA
Class-map: VLAN (match-any)
0 packets
Match: vlan 1-4094
Service-policy : MARCADO
Class-map: COS1 (match-all)
0 packets
Match: cos 1
Set dscp 15
Class-map: COS0 (match-all)
0 packets
Match: cos 0
Set dscp af11
Set cos 4
Class-map: COS2 (match-all)
0 packets
Match: cos 2
Set dscp af22
Class-map: COS3 (match-all)
0 packets
Match: cos 3
Set dscp 25
Class-map: COS4 (match-all)
0 packets
Match: cos 4
Set dscp af33
Class-map: COS5 (match-all)
0 packets
Match: cos 5
Set dscp 35
Class-map: COS6 (match-all)
0 packets
Match: cos 6
Set dscp cs5
Class-map: COS7 (match-all)
0 packets
Match: cos 7
Set dscp 45
Class-map: class-default (match-any)
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: any
Class-map: class-default (match-any)
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: any
SW_3400_2#
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide