04-17-2018 01:12 AM - edited 03-01-2019 02:04 PM
Hello team,
I have a concern regarding a request from one customer to enable link integrity/Fault signalling.
Basically they subscribe for 1G link from point A to B. What they want is , If the port at location A somehow goes down the far end port of the service should go down/shutdown automatically.
I am wondering if there is a way to do so. We are using carrier ethernet network.
06-17-2020 06:57 PM
Can the carrier Ethernet be made transparent enough for a frame-encapsulated protocol such as UDLD (in aggressive mode) or LACP to be used between customer switchports?
If the customer ports are routed ports, can BFD be used to detect lack of two-way communication?
12-12-2020 05:14 AM
Hello Yousif ,
you can use below achieve your customer request for more details check below :
Any Transport over MPLS ASR920
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide