i'v question about pop and push operation under efp instance
i'v a server that connect to interface Gi0/0/2 on my router, iface has next configuration
interface GigabitEthernet0/0/2
description Server
mtu 9216
no ip address
no ip redirects
no ip proxy-arp
negotiation auto
service instance 100 ethernet
encapsulation untagged
xconnect 10.10.10.10 4509 encapsulation mpls
backup peer 10.10.10.11 4509
mtu 1600
i wanna to incoming untagged frame will be has tag 100 added by the EFP instance and will sent to remote PE with tag 100
for outgoing frame tag 100 should be removed
am i right understand that i should issue next commands?
interface GigabitEthernet0/0/2
description Server
mtu 9216
no ip address
no ip redirects
no ip proxy-arp
negotiation auto
service instance 100 ethernet
encapsulation untagged
rewrite ingress tag push dot1q 100
rewrite egress tag pop 1
xconnect 10.10.10.10 4509 encapsulation mpls
backup peer 10.10.10.11 4509
mtu 1600